Messages in this thread | | | From | Rob Herring <> | Date | Tue, 3 May 2022 08:04:23 -0500 | Subject | Re: [PATCH net-next 1/2] dt-bindings: net: lan966x: remove PHY reset |
| |
On Thu, Apr 28, 2022 at 6:40 AM Michael Walle <michael@walle.cc> wrote: > > The PHY reset was intended to be a phandle for a special PHY reset > driver for the integrated PHYs as well as any external PHYs. It turns > out, that the culprit is how the reset of the switch device is done. > In particular, the switch reset also affects other subsystems like > the GPIO and the SGPIO block and it happens to be the case that the > reset lines of the external PHYs are connected to a common GPIO line. > Thus as soon as the switch issues a reset during probe time, all the > external PHYs will go into reset because all the GPIO lines will > switch to input and the pull-down on that signal will take effect. > > So even if there was a special PHY reset driver, it (1) won't fix > the root cause of the problem and (2) it won't fix all the other > consumers of GPIO lines which will also be reset. > > It turns out, the Ocelot SoC has the same weird behavior (or the > lack of a dedicated switch reset) and there the problem is already > solved and all the bits and pieces are already there and this PHY > reset property isn't not needed at all. > > There are no users of this binding. Just remove it.
Seems there was 1 user:
/builds/robherring/linux-dt/Documentation/devicetree/bindings/net/microchip,lan966x-switch.example.dtb: switch@e0000000: resets: [[4294967295, 0], [4294967295, 0]] is too long From schema: /builds/robherring/linux-dt/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml /builds/robherring/linux-dt/Documentation/devicetree/bindings/net/microchip,lan966x-switch.example.dtb: switch@e0000000: reset-names: ['switch', 'phy'] is too long From schema: /builds/robherring/linux-dt/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
Please fix as this is now failing in linux-next.
Rob
| |