lkml.org 
[lkml]   [2022]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 14/36] iommu/mediatek: Always enable output PA over 32bits in isr
Date
Currently the output PA[32:33] is contained by the flag IOVA_34.
This is not right. the iova_34 has no relation with pa[32:33], the 32bits
iova still could map to pa[32:33]. Move it out from the flag.

No need fix tag since currently only mt8192 use the calulation and it
always has this IOVA_34 flag.

Prepare for the IOMMU that still use IOVA 32bits but its dram size may be
over 4GB.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
drivers/iommu/mtk_iommu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index ca77e7f1ce5d..d9689e041336 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -283,11 +283,11 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT;
if (MTK_IOMMU_HAS_FLAG(data->plat_data, IOVA_34_EN)) {
va34_32 = FIELD_GET(F_MMU_INVAL_VA_34_32_MASK, fault_iova);
- pa34_32 = FIELD_GET(F_MMU_INVAL_PA_34_32_MASK, fault_iova);
fault_iova = fault_iova & F_MMU_INVAL_VA_31_12_MASK;
fault_iova |= (u64)va34_32 << 32;
- fault_pa |= (u64)pa34_32 << 32;
}
+ pa34_32 = FIELD_GET(F_MMU_INVAL_PA_34_32_MASK, fault_iova);
+ fault_pa |= (u64)pa34_32 << 32;

fault_port = F_MMU_INT_ID_PORT_ID(regval);
if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_SUB_COMM)) {
--
2.18.0
\
 
 \ /
  Last update: 2022-05-03 09:18    [W:1.208 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site