lkml.org 
[lkml]   [2022]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH for-5.19/uclogic] HID: uclogic: Remove useless loop
The while in question does nothing except provide the possibility
to have an infinite loop in case the subreport id is actually the same
as the pen id.

Signed-off-by: Stefan Berzl <stefanberzl@gmail.com>

---
drivers/hid/hid-uclogic-core.c | 55 ++++++++++++++++------------------
1 file changed, 25 insertions(+), 30 deletions(-)

diff --git a/drivers/hid/hid-uclogic-core.c b/drivers/hid/hid-uclogic-core.c
index c0fe66e50c58..1a6b941f3964 100644
--- a/drivers/hid/hid-uclogic-core.c
+++ b/drivers/hid/hid-uclogic-core.c
@@ -423,40 +423,35 @@ static int uclogic_raw_event(struct hid_device *hdev,
if (report->type != HID_INPUT_REPORT)
return 0;

- while (true) {
- /* Tweak pen reports, if necessary */
- if ((report_id == params->pen.id) && (size >= 2)) {
- subreport_list_end =
- params->pen.subreport_list +
- ARRAY_SIZE(params->pen.subreport_list);
- /* Try to match a subreport */
- for (subreport = params->pen.subreport_list;
- subreport < subreport_list_end; subreport++) {
- if (subreport->value != 0 &&
- subreport->value == data[1]) {
- break;
- }
- }
- /* If a subreport matched */
- if (subreport < subreport_list_end) {
- /* Change to subreport ID, and restart */
- report_id = data[0] = subreport->id;
- continue;
- } else {
- return uclogic_raw_event_pen(drvdata, data, size);
+ /* Tweak pen reports, if necessary */
+ if ((report_id == params->pen.id) && (size >= 2)) {
+ subreport_list_end =
+ params->pen.subreport_list +
+ ARRAY_SIZE(params->pen.subreport_list);
+ /* Try to match a subreport */
+ for (subreport = params->pen.subreport_list;
+ subreport < subreport_list_end; subreport++) {
+ if (subreport->value != 0 &&
+ subreport->value == data[1]) {
+ break;
}
}
-
- /* Tweak frame control reports, if necessary */
- for (i = 0; i < ARRAY_SIZE(params->frame_list); i++) {
- if (report_id == params->frame_list[i].id) {
- return uclogic_raw_event_frame(
- drvdata, &params->frame_list[i],
- data, size);
- }
+ /* If a subreport matched */
+ if (subreport < subreport_list_end) {
+ /* Change to subreport ID, and restart */
+ report_id = data[0] = subreport->id;
+ } else {
+ return uclogic_raw_event_pen(drvdata, data, size);
}
+ }

- break;
+ /* Tweak frame control reports, if necessary */
+ for (i = 0; i < ARRAY_SIZE(params->frame_list); i++) {
+ if (report_id == params->frame_list[i].id) {
+ return uclogic_raw_event_frame(
+ drvdata, &params->frame_list[i],
+ data, size);
+ }
}

return 0;
--
2.36.1

\
 
 \ /
  Last update: 2022-05-29 23:52    [W:0.075 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site