lkml.org 
[lkml]   [2022]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC 1/2] dt-bindings: usb: dwc3: Add support for multiport related properties
From

On 5/23/2022 5:55 PM, Rob Herring wrote:
> On Thu, May 19, 2022 at 06:04:54PM +0530, Harsh Agarwal wrote:
>> Added support for multiport, mport, num-ssphy and num-hsphy
>> properties. These properties are used to support devices having
>> a multiport controller.
>>
>> Signed-off-by: Harsh Agarwal <quic_harshq@quicinc.com>
>> ---
>> .../devicetree/bindings/usb/snps,dwc3.yaml | 55 ++++++++++++++++++++++
>> 1 file changed, 55 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
>> index f4471f8..39c61483 100644
>> --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
>> +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
>> @@ -341,6 +341,35 @@ properties:
>> This port is used with the 'usb-role-switch' property to connect the
>> dwc3 to type C connector.
>>
>> + multiport:
>> + description:
>> + If a single USB controller supports multiple ports, then it's referred to as
>> + a multiport controller. Each port of the multiport controller can support
>> + either High Speed or Super Speed or both and have their own PHY phandles. Each
>> + port is represented by "mport" node and all the "mport" nodes are grouped
>> + together inside the "multiport" node where individual "mport" node defines the
>> + PHYs supported by that port.
>> + required:
>> + - mport
>> +
>> + num-hsphy:
>> + description: Total number of HS-PHYs defined by the multiport controller.
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> +
>> + num-ssphy:
>> + description: Total number of SS-PHYs defined by the multiport controller.
>> + $ref: /schemas/types.yaml#/definitions/uint32
> These seem redundant. Can't you count ports/phys?

Counting ports will not suffice as there could be devices which has
different numbers of HS
and SS PHYs. Consider a case like a Quadport multiport controller where
we have the 1st & 2nd
port supporting SS and 3rd & 4th port supporting HS only. So we would
need the proper number
of HS and SS PHYs.
Currently in the RFC v2 we are calculating the exact number of PHYS
supported by each port
by counting the phandles we have defined.

>
>> +
>> + mport:
>> + description: Each mport node represents one port of the multiport controller.
>> + patternProperties: "^mport@[0-9a-f]+$"
> Think about how the USB device binding fits into this. A hub vs.
> multiple root ports doesn't seem much different.
A hub will have multiple ports but only one HS and SS PHYs at the root
port supporting it.
With Multiport Controller, each port will have its own PHY [whether HS
only or both HS & SS]
>
> Rob

\
 
 \ /
  Last update: 2022-05-27 13:11    [W:0.101 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site