lkml.org 
[lkml]   [2022]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] ARM: dts: add dts files for bcmbca soc 6878
Date
Add dts for ARMv7 based broadband SoC BCM6878. bcm63178.dtsi is the
SoC description dts header and bcm96878.dts is a simple dts file for
Broadcom BCM96878 Reference board that only enable the UART port.

Signed-off-by: Anand Gore <anand.gore@broadcom.com>
---

arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/bcm6878.dtsi | 109 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm96878.dts | 30 +++++++++
3 files changed, 141 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/bcm6878.dtsi
create mode 100644 arch/arm/boot/dts/bcm96878.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d9ac59524408..553fef458926 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -183,7 +183,8 @@ dtb-$(CONFIG_ARCH_BRCMSTB) += \
bcm7445-bcm97445svmb.dtb
dtb-$(CONFIG_ARCH_BCMBCA) += \
bcm947622.dtb \
- bcm963178.dtb
+ bcm963178.dtb \
+ bcm96878.dtb
dtb-$(CONFIG_ARCH_CLPS711X) += \
ep7211-edb7211.dtb
dtb-$(CONFIG_ARCH_DAVINCI) += \
diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi
new file mode 100644
index 000000000000..167a3f78f1f4
--- /dev/null
+++ b/arch/arm/boot/dts/bcm6878.dtsi
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "brcm,bcm6878", "brcm,bcmbca";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CA7_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&CA7_0>, <&CA7_1>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ uart_clk: uart-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ cpu_off = <1>;
+ cpu_on = <2>;
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x81000000 0x4000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xff800000 0x800000>;
+
+ uart0: serial@12000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm96878.dts b/arch/arm/boot/dts/bcm96878.dts
new file mode 100644
index 000000000000..8fbc175cb452
--- /dev/null
+++ b/arch/arm/boot/dts/bcm96878.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6878.dtsi"
+
+/ {
+ model = "Broadcom BCM96878 Reference Board";
+ compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--
2.25.1
[unhandled content-type:application/pkcs7-signature]
\
 
 \ /
  Last update: 2022-05-27 19:10    [W:0.044 / U:1.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site