lkml.org 
[lkml]   [2022]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 0/4] Implement vdpasim stop operation
On Thu, May 26, 2022 at 8:54 PM Parav Pandit <parav@nvidia.com> wrote:
>
>
>
> > From: Eugenio Pérez <eperezma@redhat.com>
> > Sent: Thursday, May 26, 2022 8:44 AM
>
> > Implement stop operation for vdpa_sim devices, so vhost-vdpa will offer
> >
> > that backend feature and userspace can effectively stop the device.
> >
> >
> >
> > This is a must before get virtqueue indexes (base) for live migration,
> >
> > since the device could modify them after userland gets them. There are
> >
> > individual ways to perform that action for some devices
> >
> > (VHOST_NET_SET_BACKEND, VHOST_VSOCK_SET_RUNNING, ...) but there
> > was no
> >
> > way to perform it for any vhost device (and, in particular, vhost-vdpa).
> >
> >
> >
> > After the return of ioctl with stop != 0, the device MUST finish any
> >
> > pending operations like in flight requests. It must also preserve all
> >
> > the necessary state (the virtqueue vring base plus the possible device
> >
> > specific states) that is required for restoring in the future. The
> >
> > device must not change its configuration after that point.
> >
> >
> >
> > After the return of ioctl with stop == 0, the device can continue
> >
> > processing buffers as long as typical conditions are met (vq is enabled,
> >
> > DRIVER_OK status bit is enabled, etc).
>
> Just to be clear, we are adding vdpa level new ioctl() that doesn’t map to any mechanism in the virtio spec.

We try to provide forward compatibility to VIRTIO_CONFIG_S_STOP. That
means it is expected to implement at least a subset of
VIRTIO_CONFIG_S_STOP.

>
> Why can't we use this ioctl() to indicate driver to start/stop the device instead of driving it through the driver_ok?

So the idea is to add capability that does not exist in the spec. Then
came the stop/resume which can't be done via DRIVER_OK. I think we
should only allow the stop/resume to succeed after DRIVER_OK is set.

> This is in the context of other discussion we had in the LM series.

Do you see any issue that blocks the live migration?

Thanks

\
 
 \ /
  Last update: 2022-05-27 04:27    [W:0.231 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site