lkml.org 
[lkml]   [2022]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v7 5/6] arm64: dts: mt8195: Add efuse node to mt8195
From
Il 24/05/22 17:25, Alexandre Bailon ha scritto:
> This adds the efuse node. This will be required by the thermal driver
> to get the calibration data.
>
> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8195.dtsi | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index 0011a8ba8f96..51443e83d906 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -1238,6 +1238,23 @@ nor_flash: spi@1132c000 {
> status = "disabled";
> };
>
> + efuse: efuse@11c10000 {
> + compatible = "mediatek,efuse";
> + reg = <0 0x11c10000 0 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + lvts_e_data1: data1 {

lvts1-calib@1bc

> + reg = <0x1bc 0x14>;
> + };
> + lvts_e_data2: data1-1 {

lvts2-calib@1d0

> + reg = <0x1d0 0x38>;
> + };
> + svs_calibration: calib@580 {
> + reg = <0x580 0x64>;
> + };
> + };
> +
> u3phy2: t-phy@11c40000 {
> compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
> #address-cells = <1>;

\
 
 \ /
  Last update: 2022-05-26 16:50    [W:0.077 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site