lkml.org 
[lkml]   [2022]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V4 1/2] dt-bindings: rtc: zynqmp: Add clock information
From
On 24/05/2022 14:20, Srinivas Neeli wrote:
> Added clock information and deprecated calibration support.
>
> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
> ---
> Changes in V4:
> - Deprecated calibrtion support
> Changes in V3:
> - New patch
> ---
> .../devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
> index bdb72d3ddf2a..de617707854e 100644
> --- a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
> +++ b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
> @@ -23,6 +23,14 @@ properties:
> reg:
> maxItems: 1
>
> + clocks:
> + items:
> + - description: rtc_clk is the operating frequency of crystal.
> +
> + clock-names:
> + items:
> + - const: "rtc_clk"

No quotes, no "clk" suffix. Actually entire entry is not needed, so just
"clocks" is enough.

> +
> interrupts:
> minItems: 2
>
> @@ -39,6 +47,7 @@ properties:
> minimum: 0x1
> maximum: 0x1FFFFF
> default: 0x198233
> + deprecated: true
>
> required:
> - compatible
> @@ -61,5 +70,7 @@ examples:
> interrupts = <0 26 4>, <0 27 4>;
> interrupt-names = "alarm", "sec";
> calibration = <0x198233>;
> + clock-names = "rtc_clk";
> + clocks = <&rtc_clk>;
> };
> };


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-05-26 14:56    [W:0.035 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site