lkml.org 
[lkml]   [2022]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: reset: Add TPS380x documentation
Date
Add device-tree binding documentation for the tps380x reset driver. The
binding uses enum to make it easy to add more devices from that family.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
.../bindings/reset/ti,tps380x-reset.yaml | 49 +++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml

diff --git a/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml
new file mode 100644
index 000000000000..afc835eda0ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/ti,tps380x-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS380x reset controller node bindings
+
+maintainers:
+ - Marco Felsch <kernel@pengutronix.de>
+
+description: |
+ The TPS380x family [1] of supervisory circuits monitor supply voltages to
+ provide circuit initialization and timing supervision. The devices assert a
+ RESET signal if the voltage drops below a preset threshold or upon a manual
+ reset input (MR). The RESET output remains asserted for the factory
+ programmed delay after the voltage return above its threshold or after the
+ manual reset input is released.
+
+ [1] https://www.ti.com/product/TPS3801
+
+properties:
+ compatible:
+ enum:
+ - ti,tps3801
+
+ reset-gpios:
+ maxItems: 1
+ description: Reference to the GPIO connected to the MR pin.
+
+ "#reset-cells":
+ const: 0
+
+required:
+ - compatible
+ - reset-gpios
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ reset: reset-controller {
+ compatible = "ti,tps3801";
+ #reset-cells = <0>;
+ reset-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+ };
+...
--
2.30.2
\
 
 \ /
  Last update: 2022-05-25 16:21    [W:0.049 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site