lkml.org 
[lkml]   [2022]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] ext4: correct the judgment of BUG in ext4_mb_normalize_request
On Tue 24-05-22 23:01:35, Ritesh Harjani wrote:
> On 22/05/24 11:39AM, Jan Kara wrote:
> > On Tue 24-05-22 11:56:55, Ritesh Harjani wrote:
> > > On 22/05/23 11:08PM, Jan Kara wrote:
> > > > On Tue 24-05-22 01:38:44, Ritesh Harjani wrote:
> > > > > On 22/05/21 09:42PM, Baokun Li wrote:
> > > > > > When either of the "start + size <= ac->ac_o_ex.fe_logical" or
> > > > > > "start > ac->ac_o_ex.fe_logical" conditions is met, it indicates
> > > > > > that the fe_logical is not in the allocated range.
> > > > >
> > > > > Sounds about right to me based on the logic in ext4_mb_use_inode_pa().
> > > > > We try to allocate/preallocate such that ac->ac_o_ex.fe_logical should fall
> > > > > within the preallocated range. So if our start or start + size doesn't include
> > > > > fe_logical then it is a bug in the ext4_mb_normalize_request() logic.
> > > >
> > > > I agree ac->ac_o_ex.fe_logical is a goal block. But AFAIK it never was a
> > > > hard guarantee that we would allocate extent that includes that block. It
> > >
> > > Agree that the guarantee is not about the extent which finally gets allocated.
> > > It is only within ext4_mb_normalize_request() that the "start" and "size"
> > > variable calculations is done in such a way that the ac->ac_o_ex.fe_logical
> > > block will always fall within the "start" & "end" boundaries after
> > > normalization.
> > >
> > > That is how it also updates the goal block at the end too. ac->ac_g_ex.
> > >
> > > > was always treated as a hint only. In particular if you look at the logic
> > > > in ext4_mb_normalize_request() it does shift the start of the allocation to
> > > > avoid preallocated ranges etc.
> > >
> > > Yes, I checked the logic of ext4_mb_normalize_request() again.
> > > As I see it (I can be wrong, so please correct me), there is always an attempt
> > > to make "start" & "start + size" such that it covers ac->ac_o_ex.fe_logical
> > > except just one change where we are trimming the size of the request to only
> > > EXT4_BLOCKS_PER_GROUP.
> > >
> > > For e.g. when it compares against preallocated ranges. It has a BUG() which
> > > checks if the ac->ac_o_ex.fe_logical already lies in the preallocated range.
> > > Because then we should never have come here to do allocation of a new block.
> > >
> > > 4143 /* PA must not overlap original request */
> > > 4144 BUG_ON(!(ac->ac_o_ex.fe_logical >= pa_end ||
> > > 4145 ac->ac_o_ex.fe_logical < pa->pa_lstart));
> > > <...>
> > > 4152 BUG_ON(pa->pa_lstart <= start && pa_end >= end);
> > >
> > > Then after skipping the preallocated regions which doesn't fall in between
> > > "start" and "end"...
> > >
> > > 4147 /* skip PAs this normalized request doesn't overlap with */
> > > 4148 if (pa->pa_lstart >= end || pa_end <= start) {
> > > 4149 spin_unlock(&pa->pa_lock);
> > > 4150 continue;
> > > 4151 }
> > >
> > > ...it adjusts "start" and "end" boundary according to allocated PAs boundaries
> > > such that fe_logical is always in between "start" and "end".
> > >
> > > 4154 /* adjust start or end to be adjacent to this pa */
> > > 4155 if (pa_end <= ac->ac_o_ex.fe_logical) {
> > > 4156 BUG_ON(pa_end < start);
> > > 4157 start = pa_end;
> > > 4158 } else if (pa->pa_lstart > ac->ac_o_ex.fe_logical) {
> > > 4159 BUG_ON(pa->pa_lstart > end);
> > > 4160 end = pa->pa_lstart;
> > > 4161 }
> > >
> > >
> > >
> > > > so I don't see how we are guaranteed that
> > > > ext4_mb_normalize_request() will result in an allocation request that
> > > > includes ac->ac_o_ex.fe_logical.
> > >
> > > It could be I am wrong, but looks like ext4_mb_normalize_request() keeps
> > > ac->ac_o_ex.fe_logical within "start" and "end" of allocation request.
> > > And then updates the goal block.
> > >
> > > 4196 ac->ac_g_ex.fe_logical = start;
> > > 4197 ac->ac_g_ex.fe_len = EXT4_NUM_B2C(sbi, size);
> > >
> > > Thoughts?
> >
> > Right, after some more inspection the only thing I'm concerned about is:
> >
> > /* don't cover already allocated blocks in selected range */
> > if (ar->pleft && start <= ar->lleft) {
> > size -= ar->lleft + 1 - start;
> > start = ar->lleft + 1;
> > }
> >
> > which can shift start beyond ac->ac_o_ex.fe_logical if the block would be
> > already allocated. But I guess in that case we should not be calling
> > ext4_mb_normalize_request()? ... some more code digging .. Yes, that is
> > guaranteed in how lleft is initialized in ext4_ext_map_blocks().
>
> Yes.
>
> > So OK, I withdraw my objection to the stronger check but the changelog really needs
>
> Thanks Jan for confirming it.
>
>
> > to do a better job to explain why the stronger condition should be true.
>
> Agreed.
>
>
> diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
> index 252c168454c7..9e7c145e9aa2 100644
> --- a/fs/ext4/mballoc.c
> +++ b/fs/ext4/mballoc.c
> @@ -4179,7 +4179,22 @@ ext4_mb_normalize_request(struct ext4_allocation_context *ac,
> }
> rcu_read_unlock();
>
> - if (start + size <= ac->ac_o_ex.fe_logical &&
> + /*
> + * In this function "start" and "size" are normalized for better
> + * alignment and length such that we could preallocate more blocks.
> + * This normalization is done such that original request of
> + * ac->ac_o_ex.fe_logical & fe_len should always lie within "start" and
> + * "size" boundaries.
>
> Does above comment look good to you?

Yes, thanks!

> + * (Note fe_len can be relaxed since FS block allocation API does not
> + * provide gurantee on number of contiguous blocks allocation since that
> + * depends upon free space left, etc).
> + * In case of inode pa, later we use the allocated blocks
> + * [pa_start + fe_logical - pa_lstart, fe_len/size] from the preallocated
> + * range of goal/best blocks [start, size] to put it at the
> + * ac_o_ex.fe_logical extent of this inode.
> + * (See ext4_mb_use_inode_pa() for more details)
> + */
>
> ^^^ We can even put more info if needed (maybe in commit message?)

I'd just put into commit message a note like: ext4_mb_normalize_request()
can move logical start of allocated blocks to reduce fragmentation and
better utilize preallocation. However logical block requested as a start of
allocation (ac->ac_o_ex.fe_logical) should always be covered by allocated
blocks so we add assertion to check that.

>
> + if (start + size <= ac->ac_o_ex.fe_logical ||
> start > ac->ac_o_ex.fe_logical) {
> ext4_msg(ac->ac_sb, KERN_ERR,
> "start %lu, size %lu, fe_logical %lu",
>
> FYI - I ran the fsstress test (with -g 256) shared by Baokun with only above
> change (&& -> ||) and not the original fix. And I see that we can hit this
> mentioned BUG() now.

Cool.

Honza
--
Jan Kara <jack@suse.com>
SUSE Labs, CR

\
 
 \ /
  Last update: 2022-05-25 14:13    [W:0.096 / U:0.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site