lkml.org 
[lkml]   [2022]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] dt-bindings: net: adin: Fix adi,phy-output-clock description syntax
From
Thank you very much for fixing my mistake ... ... fast!

Am 24.05.22 um 17:11 schrieb Geert Uytterhoeven:
> "make dt_binding_check":
>
> Documentation/devicetree/bindings/net/adi,adin.yaml:40:77: [error] syntax error: mapping values are not allowed here (syntax)
>
> The first line of the description ends with a colon, hence the block
> needs to be marked with a "|".
>
> Fixes: 1f77204e11f8b9e5 ("dt-bindings: net: adin: document phy clock output properties")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> Documentation/devicetree/bindings/net/adi,adin.yaml | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml
> index 77750df0c2c45e19..88611720545df2ce 100644
> --- a/Documentation/devicetree/bindings/net/adi,adin.yaml
> +++ b/Documentation/devicetree/bindings/net/adi,adin.yaml
> @@ -37,7 +37,8 @@ properties:
> default: 8
>
> adi,phy-output-clock:
> - description: Select clock output on GP_CLK pin. Two clocks are available:
> + description: |
> + Select clock output on GP_CLK pin. Two clocks are available:
> A 25MHz reference and a free-running 125MHz.
> The phy can alternatively automatically switch between the reference and
> the 125MHz clocks based on its internal state.

\
 
 \ /
  Last update: 2022-05-25 07:35    [W:0.084 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site