lkml.org 
[lkml]   [2022]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 4.9 00/25] 4.9.316-rc1 review
From
On 5/24/22 10:50, Jon Hunter wrote:
>
> On 24/05/2022 17:30, Florian Fainelli wrote:
>
> ...
>
>> Jonathan any chance this is Tegra specific? Our ARCH_BRCMSTB SoCs
>> which use a Brahma-B15 which uses nearly the same ca15 processor
>> functions defined in arch/arm/mm/proc-v7.S reports the following
>> *before* changes:
>>
>> [    0.001641] CPU: Testing write buffer coherency: ok
>> [    0.001685] CPU0: Spectre v2: using ICIALLU workaround
>> [    0.001703] ftrace: allocating 30541 entries in 120 pages
>> [    0.044600] CPU0: update cpu_capacity 1024
>> [    0.044633] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
>> [    0.044662] Setting up static identity map for 0x200000 - 0x200060
>> [    0.047410] brcmstb: biuctrl: MCP: Write pairing already disabled
>> [    0.048974] CPU1: update cpu_capacity 1024
>> [    0.048978] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
>> [    0.048981] CPU1: Spectre v2: using ICIALLU workaround
>> [    0.050234] CPU2: update cpu_capacity 1024
>> [    0.050238] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
>> [    0.050241] CPU2: Spectre v2: using ICIALLU workaround
>> [    0.051437] CPU3: update cpu_capacity 1024
>> [    0.051441] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
>> [    0.051444] CPU3: Spectre v2: using ICIALLU workaround
>> [    0.051532] Brought up 4 CPUs
>>
>> and this *after* merging 4.9.316-rc1:
>>
>> [    0.001626] CPU: Testing write buffer coherency: ok
>> [    0.001670] CPU0: Spectre v2: using ICIALLU workaround
>> [    0.001689] CPU0: Spectre BHB: using loop workaround
>> [    0.001705] ftrace: allocating 30542 entries in 120 pages
>> [    0.043752] CPU0: update cpu_capacity 1024
>> [    0.043784] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
>> [    0.043813] Setting up static identity map for 0x200000 - 0x200060
>> [    0.046547] brcmstb: biuctrl: MCP: Write pairing already disabled
>> [    0.048121] CPU1: update cpu_capacity 1024
>> [    0.048124] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
>> [    0.048129] CPU1: Spectre v2: using ICIALLU workaround
>> [    0.048165] CPU1: Spectre BHB: using loop workaround
>> [    0.049398] CPU2: update cpu_capacity 1024
>> [    0.049402] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
>> [    0.049405] CPU2: Spectre v2: using ICIALLU workaround
>> [    0.049440] CPU2: Spectre BHB: using loop workaround
>> [    0.050613] CPU3: update cpu_capacity 1024
>> [    0.050617] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
>> [    0.050619] CPU3: Spectre v2: using ICIALLU workaround
>> [    0.050653] CPU3: Spectre BHB: using loop workaround
>> [    0.050722] Brought up 4 CPUs
>> [    0.050738] SMP: Total of 4 processors activated (216.00 BogoMIPS).
>> [    0.050753] CPU: All CPU(s) started in HYP mode.
>
>
> Does your platform support CPU idle? I see this being triggered
> during CPU idle transitions ...

It does, but not with an idle state resulting in powering down secondary
cores. We do have CPU hotplug with power gating as well as system wide
suspend states that result in power gating secondaries and they appear
to be working fine.

I use the attached script to randomly cycle hot plug/unplug through each
4 cores and it has been running over 10k cycles.

>
> [    4.415167] CPU0: Spectre BHB: using loop workaround
> [    4.417621] [<c01109a0>] (unwind_backtrace) from [<c010b7ac>]
> (show_stack+0x10/0x14)
> [    4.430291] [<c010b7ac>] (show_stack) from [<c09c2b38>]
> (dump_stack+0xc0/0xd4)
> [    4.437512] [<c09c2b38>] (dump_stack) from [<c011a6c8>]
> (cpu_v7_spectre_bhb_init+0xd8/0x190)
> [    4.445943] [<c011a6c8>] (cpu_v7_spectre_bhb_init) from [<c010dee8>]
> (cpu_suspend+0xac/0xc8)
> [    4.454377] [<c010dee8>] (cpu_suspend) from [<c011e7e4>]
> (tegra114_idle_power_down+0x74/0x78)
> [    4.462898] [<c011e7e4>] (tegra114_idle_power_down) from [<c06d3b44>]
> (cpuidle_enter_state+0x130/0x524)
> [    4.472286] [<c06d3b44>] (cpuidle_enter_state) from [<c0164a30>]
> (do_idle+0x1b0/0x200)
> [    4.480199] [<c0164a30>] (do_idle) from [<c0164d28>]
> (cpu_startup_entry+0x18/0x1c)
> [    4.487762] [<c0164d28>] (cpu_startup_entry) from [<801018cc>]
> (0x801018cc)
>
> Jon
>


--
Florian[unhandled content-type:application/x-shellscript]
\
 
 \ /
  Last update: 2022-05-24 20:43    [W:0.081 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site