lkml.org 
[lkml]   [2022]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 5/7] dt-bindings: Add xen,dev-domid property description for xen-grant DMA ops
+Saravana

On Mon, May 23, 2022 at 06:58:13PM -0700, Stefano Stabellini wrote:
> On Mon, 23 May 2022, Oleksandr wrote:
> > > > On Thu, 19 May 2022, Oleksandr wrote:
> > > > > > On Wed, May 18, 2022 at 5:06 PM Oleksandr <olekstysh@gmail.com> wrote:
> > > > > > > On 18.05.22 17:32, Arnd Bergmann wrote:
> > > > > > > > On Sat, May 7, 2022 at 7:19 PM Oleksandr Tyshchenko
> > > > > > > > <olekstysh@gmail.com> wrote:
> > > > > > > >     This would mean having a device
> > > > > > > > node for the grant-table mechanism that can be referred to using
> > > > > > > > the
> > > > > > > > 'iommus'
> > > > > > > > phandle property, with the domid as an additional argument.
> > > > > > > I assume, you are speaking about something like the following?
> > > > > > >
> > > > > > >
> > > > > > > xen_dummy_iommu {
> > > > > > >       compatible = "xen,dummy-iommu";
> > > > > > >       #iommu-cells = <1>;
> > > > > > > };
> > > > > > >
> > > > > > > virtio@3000 {
> > > > > > >       compatible = "virtio,mmio";
> > > > > > >       reg = <0x3000 0x100>;
> > > > > > >       interrupts = <41>;
> > > > > > >
> > > > > > >       /* The device is located in Xen domain with ID 1 */
> > > > > > >       iommus = <&xen_dummy_iommu 1>;
> > > > > > > };
> > > > > > Right, that's that's the idea,
> > > > > thank you for the confirmation
> > > > >
> > > > >
> > > > >
> > > > > >    except I would not call it a 'dummy'.
> > > > > >   From the perspective of the DT, this behaves just like an IOMMU,
> > > > > > even if the exact mechanism is different from most hardware IOMMU
> > > > > > implementations.
> > > > > well, agree
> > > > >
> > > > >
> > > > > > > > It does not quite fit the model that Linux currently uses for
> > > > > > > > iommus,
> > > > > > > > as that has an allocator for dma_addr_t space
> > > > > > > yes (# 3/7 adds grant-table based allocator)
> > > > > > >
> > > > > > >
> > > > > > > > , but it would think it's
> > > > > > > > conceptually close enough that it makes sense for the binding.
> > > > > > > Interesting idea. I am wondering, do we need an extra actions for
> > > > > > > this
> > > > > > > to work in Linux guest (dummy IOMMU driver, etc)?
> > > > > > It depends on how closely the guest implementation can be made to
> > > > > > resemble a normal iommu. If you do allocate dma_addr_t addresses,
> > > > > > it may actually be close enough that you can just turn the grant-table
> > > > > > code into a normal iommu driver and change nothing else.
> > > > > Unfortunately, I failed to find a way how use grant references at the
> > > > > iommu_ops level (I mean to fully pretend that we are an IOMMU driver). I
> > > > > am
> > > > > not too familiar with that, so what is written below might be wrong or
> > > > > at
> > > > > least not precise.
> > > > >
> > > > > The normal IOMMU driver in Linux doesn’t allocate DMA addresses by
> > > > > itself, it
> > > > > just maps (IOVA-PA) what was requested to be mapped by the upper layer.
> > > > > The
> > > > > DMA address allocation is done by the upper layer (DMA-IOMMU which is
> > > > > the glue
> > > > > layer between DMA API and IOMMU API allocates IOVA for PA?). But, all
> > > > > what we
> > > > > need here is just to allocate our specific grant-table based DMA
> > > > > addresses
> > > > > (DMA address = grant reference + offset in the page), so let’s say we
> > > > > need an
> > > > > entity to take a physical address as parameter and return a DMA address
> > > > > (what
> > > > > actually commit #3/7 is doing), and that’s all. So working at the
> > > > > dma_ops
> > > > > layer we get exactly what we need, with the minimal changes to guest
> > > > > infrastructure. In our case the Xen itself acts as an IOMMU.
> > > > >
> > > > > Assuming that we want to reuse the IOMMU infrastructure somehow for our
> > > > > needs.
> > > > > I think, in that case we will likely need to introduce a new specific
> > > > > IOVA
> > > > > allocator (alongside with a generic one) to be hooked up by the
> > > > > DMA-IOMMU
> > > > > layer if we run on top of Xen. But, even having the specific IOVA
> > > > > allocator to
> > > > > return what we indeed need (DMA address = grant reference + offset in
> > > > > the
> > > > > page) we will still need the specific minimal required IOMMU driver to
> > > > > be
> > > > > present in the system anyway in order to track the mappings(?) and do
> > > > > nothing
> > > > > with them, returning a success (this specific IOMMU driver should have
> > > > > all
> > > > > mandatory callbacks implemented).
> > > > >
> > > > > I completely agree, it would be really nice to reuse generic IOMMU
> > > > > bindings
> > > > > rather than introducing Xen specific property if what we are trying to
> > > > > implement in current patch series fits in the usage of "iommus" in Linux
> > > > > more-less. But, if we will have to add more complexity/more components
> > > > > to the
> > > > > code for the sake of reusing device tree binding, this raises a question
> > > > > whether that’s worthwhile.
> > > > >
> > > > > Or I really missed something?
> > > > I think Arnd was primarily suggesting to reuse the IOMMU Device Tree
> > > > bindings, not necessarily the IOMMU drivers framework in Linux (although
> > > > that would be an added bonus.)
> > > >
> > > > I know from previous discussions with you that making the grant table
> > > > fit in the existing IOMMU drivers model is difficult, but just reusing
> > > > the Device Tree bindings seems feasible?
> > >
> > > I started experimenting with that. As wrote in a separate email, I got a
> > > deferred probe timeout,
> > >
> > > after inserting required nodes into guest device tree, which seems to be a
> > > consequence of the unavailability of IOMMU, I will continue to investigate
> > > this question.
> >
> >
> > I have experimented with that. Yes, just reusing the Device Tree bindings is
> > technically feasible (and we are able to do this by only touching
> > grant-dma-ops.c), although deferred probe timeout still stands (as there is no
> > IOMMU driver being present actually).
> >
> > [    0.583771] virtio-mmio 2000000.virtio: deferred probe timeout, ignoring
> > dependency
> > [    0.615556] virtio_blk virtio0: [vda] 4096000 512-byte logical blocks (2.10
> > GB/1.95 GiB)
> >
> >
> > Below the working diff (on top of current series):
> >
> > diff --git a/drivers/xen/grant-dma-ops.c b/drivers/xen/grant-dma-ops.c
> > index da9c7ff..6586152 100644
> > --- a/drivers/xen/grant-dma-ops.c
> > +++ b/drivers/xen/grant-dma-ops.c
> > @@ -272,17 +272,24 @@ static const struct dma_map_ops xen_grant_dma_ops = {
> >
> >  bool xen_is_grant_dma_device(struct device *dev)
> >  {
> > +       struct device_node *iommu_np;
> > +       bool has_iommu;
> > +
> >         /* XXX Handle only DT devices for now */
> >         if (!dev->of_node)
> >                 return false;
> >
> > -       return of_property_read_bool(dev->of_node, "xen,backend-domid");
> > +       iommu_np = of_parse_phandle(dev->of_node, "iommus", 0);
> > +       has_iommu = iommu_np && of_device_is_compatible(iommu_np,
> > "xen,grant-dma");
> > +       of_node_put(iommu_np);
> > +
> > +       return has_iommu;
> >  }
> >
> >  void xen_grant_setup_dma_ops(struct device *dev)
> >  {
> >         struct xen_grant_dma_data *data;
> > -       uint32_t domid;
> > +       struct of_phandle_args iommu_spec;
> >
> >         data = find_xen_grant_dma_data(dev);
> >         if (data) {
> > @@ -294,16 +301,30 @@ void xen_grant_setup_dma_ops(struct device *dev)
> >         if (!dev->of_node)
> >                 goto err;
> >
> > -       if (of_property_read_u32(dev->of_node, "xen,backend-domid", &domid)) {
> > -               dev_err(dev, "xen,backend-domid property is not present\n");
> > +       if (of_parse_phandle_with_args(dev->of_node, "iommus", "#iommu-cells",
> > +                       0, &iommu_spec)) {
> > +               dev_err(dev, "Cannot parse iommus property\n");
> > +               goto err;
> > +       }
> > +
> > +       if (!of_device_is_compatible(iommu_spec.np, "xen,grant-dma") ||
> > +                       iommu_spec.args_count != 1) {
> > +               dev_err(dev, "Incompatible IOMMU node\n");
> > +               of_node_put(iommu_spec.np);
> >                 goto err;
> >         }
> >
> > +       of_node_put(iommu_spec.np);
> > +
> >         data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> >         if (!data)
> >                 goto err;
> >
> > -       data->backend_domid = domid;
> > +       /*
> > +        * The endpoint ID here means the ID of the domain where the
> > corresponding
> > +        * backend is running
> > +        */
> > +       data->backend_domid = iommu_spec.args[0];
> >
> >         if (xa_err(xa_store(&xen_grant_dma_devices, (unsigned long)dev, data,
> >                         GFP_KERNEL))) {
> > (END)
> >
> >
> >
> > Below, the nodes generated by Xen toolstack:
> >
> >         xen_grant_dma {

Nit: iommu {

> >                 compatible = "xen,grant-dma";
> >                 #iommu-cells = <0x01>;
> >                 phandle = <0xfde9>;
> >         };
> >
> >         virtio@2000000 {
> >                 compatible = "virtio,mmio";
> >                 reg = <0x00 0x2000000 0x00 0x200>;
> >                 interrupts = <0x00 0x01 0xf01>;
> >                 interrupt-parent = <0xfde8>;
> >                 dma-coherent;
> >                 iommus = <0xfde9 0x01>;
> >         };
>
> Not bad! I like it.
>
>
> > I am wondering, would be the proper solution to eliminate deferred probe
> > timeout issue in our particular case (without introducing an extra IOMMU
> > driver)?
>
> In reality I don't think there is a way to do that. I would create an
> empty skelethon IOMMU driver for xen,grant-dma.

Does it have to be an empty driver? Originally, IOMMU 'drivers' were not
drivers, but they've been getting converted. Can that be done here?

Short of that, I think we could have some sort of skip probe list for
deferred probe. Not sure if that would be easiest as IOMMU specific or
global.

Rob

\
 
 \ /
  Last update: 2022-05-24 18:05    [W:0.116 / U:1.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site