lkml.org 
[lkml]   [2022]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] mailbox: qcom-ipcc: Log the pending interrupt during resume
On Tue, May 17, 2022 at 04:13:00PM +0530, Sibi Sankar wrote:
> From: Prasad Sodagudi <quic_psodagud@quicinc.com>
>
> Enable logging of the pending interrupt that triggered device wakeup. This
> logging information helps to debug IRQs that cause periodic device wakeups
> by printing the detailed information of pending IPCC interrupts.
>
> Scenario: Device wakeup caused by Modem crash
> Logs:
> qcom-ipcc mailbox: virq: 182 triggered client-id: 2; signal-id: 2
>
> >From the IPCC bindings it can further be understood that the client here is
> IPCC_CLIENT_MPSS and the signal was IPCC_MPROC_SIGNAL_SMP2P.
>
> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
> Signed-off-by: Prasad Sodagudi <quic_psodagud@quicinc.com>
> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
> ---
>
> V3:
> * Use pm_sleep_ptr and convert info to dbg [Mani]

Unfortunately, this results in

drivers/mailbox/qcom-ipcc.c:258:12: error: 'qcom_ipcc_pm_resume' defined but not used

on builds with PM disabled, as seen in next-20220524.

Guenter

> * Fixup commit message
>
> V2:
> * Fix build error when ipcc is a module [Kernel Test Bot]
>
> drivers/mailbox/qcom-ipcc.c | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/drivers/mailbox/qcom-ipcc.c b/drivers/mailbox/qcom-ipcc.c
> index c5d963222014..5a42bc2a1083 100644
> --- a/drivers/mailbox/qcom-ipcc.c
> +++ b/drivers/mailbox/qcom-ipcc.c
> @@ -254,6 +254,24 @@ static int qcom_ipcc_setup_mbox(struct qcom_ipcc *ipcc,
> return devm_mbox_controller_register(dev, mbox);
> }
>
> +static int qcom_ipcc_pm_resume(struct device *dev)
> +{
> + struct qcom_ipcc *ipcc = dev_get_drvdata(dev);
> + u32 hwirq;
> + int virq;
> +
> + hwirq = readl(ipcc->base + IPCC_REG_RECV_ID);
> + if (hwirq == IPCC_NO_PENDING_IRQ)
> + return 0;
> +
> + virq = irq_find_mapping(ipcc->irq_domain, hwirq);
> +
> + dev_dbg(dev, "virq: %d triggered client-id: %ld; signal-id: %ld\n", virq,
> + FIELD_GET(IPCC_CLIENT_ID_MASK, hwirq), FIELD_GET(IPCC_SIGNAL_ID_MASK, hwirq));
> +
> + return 0;
> +}
> +
> static int qcom_ipcc_probe(struct platform_device *pdev)
> {
> struct qcom_ipcc *ipcc;
> @@ -324,6 +342,10 @@ static const struct of_device_id qcom_ipcc_of_match[] = {
> };
> MODULE_DEVICE_TABLE(of, qcom_ipcc_of_match);
>
> +static const struct dev_pm_ops qcom_ipcc_dev_pm_ops = {
> + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, qcom_ipcc_pm_resume)
> +};
> +
> static struct platform_driver qcom_ipcc_driver = {
> .probe = qcom_ipcc_probe,
> .remove = qcom_ipcc_remove,
> @@ -331,6 +353,7 @@ static struct platform_driver qcom_ipcc_driver = {
> .name = "qcom-ipcc",
> .of_match_table = qcom_ipcc_of_match,
> .suppress_bind_attrs = true,
> + .pm = pm_sleep_ptr(&qcom_ipcc_dev_pm_ops),
> },
> };
>
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2022-05-24 15:49    [W:0.054 / U:1.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site