lkml.org 
[lkml]   [2022]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH V1] mmc: core: Enable force hw reset
Date
Hi,
These patches will be further taken by Sarthak.

Thanks,
Satya

-----Original Message-----
From: Adrian Hunter <adrian.hunter@intel.com>
Sent: Wednesday, April 27, 2022 6:04 PM
To: quic_spathi <quic_spathi@quicinc.com>; ulf.hansson@linaro.org; riteshh@codeaurora.org; asutoshd@codeaurora.org; axboe@kernel.dk; avri.altman@wdc.com; kch@nvidia.com; CLoehle@hyperstone.com; swboyd@chromium.org; digetx@gmail.com; bigeasy@linutronix.de; linux-mmc@vger.kernel.org; linux-kernel@vger.kernel.org
Cc: Shaik Sajida Bhanu <sbhanu@codeaurora.org>; Kamasali Satyanarayan (Consultant) (QUIC) <quic_kamasali@quicinc.com>
Subject: Re: [PATCH V1] mmc: core: Enable force hw reset

On 26/04/22 11:30, Srinivasarao Pathipati wrote:
> From: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
>
> During error recovery set need hw reset to handle ICE error where cqe
> reset is must.

How do you get ICE errors? Doesn't it mean either the hardware is broken or the configuration is broken?

>
> Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
> Signed-off-by: kamasali <quic_kamasali@quicinc.com>
> Signed-off-by: Srinivasarao Pathipati <quic_spathi@quicinc.com>
> ---
> drivers/mmc/core/block.c | 8 +++++---
> drivers/mmc/host/cqhci-core.c | 7 +++++--
> include/linux/mmc/host.h | 1 +
> 3 files changed, 11 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index
> b35e7a9..f63bf33 100644
> --- a/drivers/mmc/core/block.c
> +++ b/drivers/mmc/core/block.c
> @@ -1482,10 +1482,12 @@ void mmc_blk_cqe_recovery(struct mmc_queue *mq)
> pr_debug("%s: CQE recovery start\n", mmc_hostname(host));
>
> err = mmc_cqe_recovery(host);
> - if (err)
> + if (err || host->need_hw_reset) {
> mmc_blk_reset(mq->blkdata, host, MMC_BLK_CQE_RECOVERY);
> - else
> - mmc_blk_reset_success(mq->blkdata, MMC_BLK_CQE_RECOVERY);
> + if (host->need_hw_reset)
> + host->need_hw_reset = false;
> + }
> + mmc_blk_reset_success(mq->blkdata, MMC_BLK_CQE_RECOVERY);
>
> pr_debug("%s: CQE recovery done\n", mmc_hostname(host)); } diff
> --git a/drivers/mmc/host/cqhci-core.c b/drivers/mmc/host/cqhci-core.c
> index b0d30c3..311b510 100644
> --- a/drivers/mmc/host/cqhci-core.c
> +++ b/drivers/mmc/host/cqhci-core.c
> @@ -812,18 +812,21 @@ static void cqhci_finish_mrq(struct mmc_host
> *mmc, unsigned int tag) irqreturn_t cqhci_irq(struct mmc_host *mmc, u32 intmask, int cmd_error,
> int data_error)
> {
> - u32 status;
> + u32 status, ice_err;
> unsigned long tag = 0, comp_status;
> struct cqhci_host *cq_host = mmc->cqe_private;
>
> status = cqhci_readl(cq_host, CQHCI_IS);
> cqhci_writel(cq_host, status, CQHCI_IS);
> + ice_err = status & (CQHCI_IS_GCE | CQHCI_IS_ICCE);
>
> pr_debug("%s: cqhci: IRQ status: 0x%08x\n", mmc_hostname(mmc),
> status);
>
> if ((status & (CQHCI_IS_RED | CQHCI_IS_GCE | CQHCI_IS_ICCE)) ||
> - cmd_error || data_error)
> + cmd_error || data_error || ice_err){
> + mmc->need_hw_reset = true;
> cqhci_error_irq(mmc, status, cmd_error, data_error);
> + }
>
> if (status & CQHCI_IS_TCC) {
> /* read TCN and complete the request */ diff --git
> a/include/linux/mmc/host.h b/include/linux/mmc/host.h index
> c193c50..3d00bcf 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -492,6 +492,7 @@ struct mmc_host {
> int cqe_qdepth;
> bool cqe_enabled;
> bool cqe_on;
> + bool need_hw_reset;
>
> /* Inline encryption support */
> #ifdef CONFIG_MMC_CRYPTO

\
 
 \ /
  Last update: 2022-05-24 14:04    [W:8.662 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site