lkml.org 
[lkml]   [2022]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH -next] serial: pic32: fix missing clk_disable_unprepare() on error in pic32_uart_startup()
Date
Fix the missing clk_disable_unprepare() before return
from pic32_uart_startup() in the error handling case.

Fixes: 157b9394709e ("serial: pic32_uart: Add PIC32 UART driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
drivers/tty/serial/pic32_uart.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c
index b399aac530fe..f418f1de66b3 100644
--- a/drivers/tty/serial/pic32_uart.c
+++ b/drivers/tty/serial/pic32_uart.c
@@ -503,7 +503,7 @@ static int pic32_uart_startup(struct uart_port *port)
if (!sport->irq_fault_name) {
dev_err(port->dev, "%s: kasprintf err!", __func__);
ret = -ENOMEM;
- goto out_done;
+ goto out_disable_clk;
}
irq_set_status_flags(sport->irq_fault, IRQ_NOAUTOEN);
ret = request_irq(sport->irq_fault, pic32_uart_fault_interrupt,
@@ -579,6 +579,8 @@ static int pic32_uart_startup(struct uart_port *port)
out_f:
free_irq(sport->irq_fault, port);
kfree(sport->irq_fault_name);
+out_disable_clk:
+ clk_disable_unprepare(sport->clk);
out_done:
return ret;
}
--
2.25.1
\
 
 \ /
  Last update: 2022-05-25 04:02    [W:0.072 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site