lkml.org 
[lkml]   [2022]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] ARM: s3c: Kconfig.s3c24xx: Fix indentation and replace some tabs
Date
The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.

While add it, replace tabs before comments with whitespaces and squeeze
multiple empty lines.

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
---
arch/arm/mach-s3c/Kconfig.s3c24xx | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-s3c/Kconfig.s3c24xx b/arch/arm/mach-s3c/Kconfig.s3c24xx
index 000e3e234f71..a7625e772905 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c24xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c24xx
@@ -17,8 +17,6 @@ config PLAT_S3C24XX
help
Base platform code for any Samsung S3C24XX device

-
-
menu "Samsung S3C24XX SoCs Support"

comment "S3C24XX SoCs"
@@ -268,7 +266,7 @@ config MACH_VR1000
help
Say Y here if you are using the Thorcom VR1000 board.

-endif # CPU_S3C2410
+endif # CPU_S3C2410

config S3C2412_PM_SLEEP
bool
@@ -342,7 +340,7 @@ config MACH_VSTMS
help
Say Y here if you are using an VSTMS board

-endif # CPU_S3C2412
+endif # CPU_S3C2412

if CPU_S3C2416

@@ -390,7 +388,7 @@ config MACH_S3C2416_DT
Note: This is under development and not all peripherals can be supported
with this machine file.

-endif # CPU_S3C2416
+endif # CPU_S3C2416

if CPU_S3C2440 || CPU_S3C2442

@@ -419,7 +417,7 @@ config S3C2440_PLL_16934400
default y if S3C24XX_PLL
help
PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-endif
+endif # CPU_S3C2440 || CPU_S3C2442

if CPU_S3C2440

@@ -515,7 +513,7 @@ config SMDK2440_CPU2440
default y if ARCH_S3C2440
select S3C2440_XTAL_16934400

-endif # CPU_S3C2440
+endif # CPU_S3C2440

if CPU_S3C2442

@@ -535,7 +533,7 @@ config MACH_NEO1973_GTA02
select S3C24XX_PWM
select S3C_DEV_USB_HOST
help
- Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+ Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone

config MACH_RX1950
bool "HP iPAQ rx1950"
@@ -547,9 +545,9 @@ config MACH_RX1950
select S3C24XX_PWM
select S3C_DEV_NAND
help
- Say Y here if you're using HP iPAQ rx1950
+ Say Y here if you're using HP iPAQ rx1950

-endif # CPU_S3C2442
+endif # CPU_S3C2442

if CPU_S3C2443 || CPU_S3C2416

@@ -558,7 +556,7 @@ config S3C2443_SETUP_SPI
help
Common setup code for SPI GPIO configurations

-endif # CPU_S3C2443 || CPU_S3C2416
+endif # CPU_S3C2443 || CPU_S3C2416

if CPU_S3C2443

@@ -571,13 +569,13 @@ config MACH_SMDK2443
help
Say Y here if you are using an SMDK2443

-endif # CPU_S3C2443
+endif # CPU_S3C2443

config PM_H1940
bool
help
Internal node for H1940 and related PM

-endmenu # Samsung S3C24XX SoCs Support
+endmenu # "Samsung S3C24XX SoCs Support"

-endif # ARCH_S3C24XX
+endif # ARCH_S3C24XX
--
2.32.0
\
 
 \ /
  Last update: 2022-05-23 09:42    [W:0.099 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site