lkml.org 
[lkml]   [2022]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/3] ARM: s3c: Kconfig.s3c24xx: Fix indentation and replace some tabs
Date
Thanks Juerg for your patch.

>-----Original Message-----
>From: Juerg Haefliger [mailto:juerg.haefliger@canonical.com]
>Sent: Monday, May 23, 2022 12:13 PM
>To: krzysztof.kozlowski@linaro.org; alim.akhtar@samsung.com;
>linux@armlinux.org.uk; linux-arm-kernel@lists.infradead.org; linux-samsung-
>soc@vger.kernel.org
>Cc: linux-kernel@vger.kernel.org; Juerg Haefliger <juergh@canonical.com>
>Subject: [PATCH 2/3] ARM: s3c: Kconfig.s3c24xx: Fix indentation and replace
>some tabs
>
>The convention for indentation seems to be a single tab. Help text is
further
>indented by an additional two whitespaces. Fix the lines that violate these
>rules.
>
>While add it, replace tabs before comments with whitespaces and squeeze
>multiple empty lines.
>
>Signed-off-by: Juerg Haefliger <juergh@canonical.com>
>---
> arch/arm/mach-s3c/Kconfig.s3c24xx | 26 ++++++++++++--------------
> 1 file changed, 12 insertions(+), 14 deletions(-)
>
>diff --git a/arch/arm/mach-s3c/Kconfig.s3c24xx b/arch/arm/mach-
>s3c/Kconfig.s3c24xx
>index 000e3e234f71..a7625e772905 100644
>--- a/arch/arm/mach-s3c/Kconfig.s3c24xx
>+++ b/arch/arm/mach-s3c/Kconfig.s3c24xx
>@@ -17,8 +17,6 @@ config PLAT_S3C24XX
> help
> Base platform code for any Samsung S3C24XX device
>
>-
>-
> menu "Samsung S3C24XX SoCs Support"
>
> comment "S3C24XX SoCs"
>@@ -268,7 +266,7 @@ config MACH_VR1000
> help
> Say Y here if you are using the Thorcom VR1000 board.
>
>-endif # CPU_S3C2410
>+endif # CPU_S3C2410
>
> config S3C2412_PM_SLEEP
> bool
>@@ -342,7 +340,7 @@ config MACH_VSTMS
> help
> Say Y here if you are using an VSTMS board
>
>-endif # CPU_S3C2412
>+endif # CPU_S3C2412
>
> if CPU_S3C2416
>
>@@ -390,7 +388,7 @@ config MACH_S3C2416_DT
> Note: This is under development and not all peripherals can be
>supported
> with this machine file.
>
>-endif # CPU_S3C2416
>+endif # CPU_S3C2416
>
> if CPU_S3C2440 || CPU_S3C2442
>
>@@ -419,7 +417,7 @@ config S3C2440_PLL_16934400
> default y if S3C24XX_PLL
> help
> PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
>-endif
>+endif # CPU_S3C2440 || CPU_S3C2442
>

This change is more then what commit message tells, so please mention these
in the commit message as well
Rest looks fine to me.


> if CPU_S3C2440
>
>@@ -515,7 +513,7 @@ config SMDK2440_CPU2440
> default y if ARCH_S3C2440
> select S3C2440_XTAL_16934400
>
>-endif # CPU_S3C2440
>+endif # CPU_S3C2440
>
> if CPU_S3C2442
>
>@@ -535,7 +533,7 @@ config MACH_NEO1973_GTA02
> select S3C24XX_PWM
> select S3C_DEV_USB_HOST
> help
>- Say Y here if you are using the Openmoko GTA02 / Freerunner GSM
>Phone
>+ Say Y here if you are using the Openmoko GTA02 / Freerunner GSM
>+Phone
>
> config MACH_RX1950
> bool "HP iPAQ rx1950"
>@@ -547,9 +545,9 @@ config MACH_RX1950
> select S3C24XX_PWM
> select S3C_DEV_NAND
> help
>- Say Y here if you're using HP iPAQ rx1950
>+ Say Y here if you're using HP iPAQ rx1950
>
>-endif # CPU_S3C2442
>+endif # CPU_S3C2442
>
> if CPU_S3C2443 || CPU_S3C2416
>
>@@ -558,7 +556,7 @@ config S3C2443_SETUP_SPI
> help
> Common setup code for SPI GPIO configurations
>
>-endif # CPU_S3C2443 || CPU_S3C2416
>+endif # CPU_S3C2443 || CPU_S3C2416
>
> if CPU_S3C2443
>
>@@ -571,13 +569,13 @@ config MACH_SMDK2443
> help
> Say Y here if you are using an SMDK2443
>
>-endif # CPU_S3C2443
>+endif # CPU_S3C2443
>
> config PM_H1940
> bool
> help
> Internal node for H1940 and related PM
>
>-endmenu # Samsung S3C24XX SoCs Support
>+endmenu # "Samsung S3C24XX SoCs Support"
>
>-endif # ARCH_S3C24XX
>+endif # ARCH_S3C24XX
>--
>2.32.0


\
 
 \ /
  Last update: 2022-05-23 09:29    [W:0.152 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site