lkml.org 
[lkml]   [2022]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 03/23] dt-bindings: ata: ahci-platform: Clarify common AHCI props constraints
On Tue, May 17, 2022 at 02:14:09PM -0500, Rob Herring wrote:
> On Thu, May 12, 2022 at 02:17:50AM +0300, Serge Semin wrote:
> > Indeed in accordance with what is imeplemtned in the AHCI paltform driver
> > and the way the AHCI DT nodes are defined in the DT files we can add the
> > next AHCI DT properties constraints: AHCI CSR ID is fixed to 'ahci', PHY
> > name is fixed to 'sata-phy', AHCI controller can't have more than 32 ports
> > by design.
> >
> > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> >
> > Changelog v2:
> > - This is a new patch created after rebasing v1 onto the 5.18-rc3 kernel.
> > ---
> > .../devicetree/bindings/ata/ahci-common.yaml | 15 ++++++++++-----
> > 1 file changed, 10 insertions(+), 5 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml
> > index 620042ca12e7..a7d1a8353de3 100644
> > --- a/Documentation/devicetree/bindings/ata/ahci-common.yaml
> > +++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml
> > @@ -31,6 +31,8 @@ properties:
> >
> > reg-names:
> > description: CSR space IDs
> > + contains:
> > + const: ahci
>

> Okay, with this it makes sense to keep. The others still should go.

Ok.

-Sergey

>
> >
> > interrupts:
> > description:
> > @@ -71,14 +73,13 @@ properties:
> > maxItems: 1
> >
> > phy-names:
> > - maxItems: 1
> > + const: sata-phy
> >
> > ports-implemented:
> > $ref: '/schemas/types.yaml#/definitions/uint32'
> > description:
> > Mask that indicates which ports the HBA supports. Useful if PI is not
> > programmed by the BIOS, which is true for some embedded SoC's.
> > - maximum: 0x1f
> >
> > patternProperties:
> > "^sata-port@[0-9a-f]+$":
> > @@ -89,8 +90,12 @@ patternProperties:
> >
> > properties:
> > reg:
> > - description: AHCI SATA port identifier
> > - maxItems: 1
> > + description:
> > + AHCI SATA port identifier. By design AHCI controller can't have
> > + more than 32 ports due to the CAP.NP fields and PI register size
> > + constraints.
> > + minimum: 0
> > + maximum: 31
> >
> > phys:
> > description: Individual AHCI SATA port PHY
> > @@ -98,7 +103,7 @@ patternProperties:
> >
> > phy-names:
> > description: AHCI SATA port PHY ID
> > - maxItems: 1
> > + const: sata-phy
> >
> > target-supply:
> > description: Power regulator for SATA port target device
> > --
> > 2.35.1
> >
> >

\
 
 \ /
  Last update: 2022-05-22 17:09    [W:0.111 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site