lkml.org 
[lkml]   [2022]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[v2 0/3] Add dtsi for sc7280 herobrine boards that using rt5682 codec
Date
Put sound node and lpass_cpu node settings for boards that use rt5682
codec in the sc7280-herobrine-audio-rt5682.dtsi as there are different
choices of headset codec for herobrine projects. Common audio setting
for the internal speaker is in sc7280-herobrine.dtsi.

This series depends on:
"Add lpass pin control support for audio on sc7280 based targets" [1]
"Add soundcard support for sc7280 based platforms" [2]

[1] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638776
[2] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=643589

Changes Since V1:
-- Remove sound-dai-cells in sound node.
-- Add dependency list.
-- Update patch subject.

Judy Hsiao (3):
arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1
arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi
arm64: dts: qcom: sc7280: include sc7280-herobrine-audio-rt5682.dtsi
in villager and herobrine-r1

.../qcom/sc7280-herobrine-audio-rt5682.dtsi | 120 ++++++++++++++++++
.../qcom/sc7280-herobrine-herobrine-r1.dts | 1 +
.../dts/qcom/sc7280-herobrine-villager-r0.dts | 1 +
.../arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 14 ++
4 files changed, 136 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi

--
2.36.1.124.g0e6072fb45-goog

\
 
 \ /
  Last update: 2022-05-20 18:12    [W:0.087 / U:2.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site