lkml.org 
[lkml]   [2022]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 7/9] serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
From
Hi Ilpo

On 5/19/22 10:18, Ilpo Järvinen wrote:
> Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or
> CS6 to CS8. In addition, ASC_CTL_MODE_7BIT_PAR suggests that CS7 has
> to have parity, thus add PARENB.
>
> Incorrect CSIZE results in miscalculation of the frame bits in
> tty_get_char_size() or in its predecessor where the roughly the same
> code is directly within uart_update_timeout().
>
> Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com>
> Fixes: c4b058560762 (serial:st-asc: Add ST ASC driver.)
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> ---
> drivers/tty/serial/st-asc.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
> index d7fd692286cf..1b0da603ab54 100644
> --- a/drivers/tty/serial/st-asc.c
> +++ b/drivers/tty/serial/st-asc.c
> @@ -535,10 +535,14 @@ static void asc_set_termios(struct uart_port *port, struct ktermios *termios,
> /* set character length */
> if ((cflag & CSIZE) == CS7) {
> ctrl_val |= ASC_CTL_MODE_7BIT_PAR;
> + cflag |= PARENB;
> } else {
> ctrl_val |= (cflag & PARENB) ? ASC_CTL_MODE_8BIT_PAR :
> ASC_CTL_MODE_8BIT;
> + cflag &= ~CSIZE;
> + cflag |= CS8;
> }
> + termios->c_cflag = cflag;
>
> /* set stop bit */
> ctrl_val |= (cflag & CSTOPB) ? ASC_CTL_STOP_2BIT : ASC_CTL_STOP_1BIT;

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice

\
 
 \ /
  Last update: 2022-05-20 08:20    [W:0.071 / U:2.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site