lkml.org 
[lkml]   [2022]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] Bluetooth: hci_bcm: Autobaud mode support
Date
Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading.
Autobaud mode can also be required on some boards where the controller
device is using a non-standard baud rate when first powered on.

Only a limited subset of HCI commands are supported in autobaud mode.

These patches add a DT property, "brcm,uses-autobaud-mode", to control
autobaud mode selection.

Changes v1 -> v2:
- Modify description in binding document

Hakan Jansson (2):
dt-bindings: net: broadcom-bluetooth: Add property for autobaud mode
Bluetooth: hci_bcm: Add support for FW loading in autobaud mode

.../bindings/net/broadcom-bluetooth.yaml | 9 ++++++
drivers/bluetooth/btbcm.c | 31 ++++++++++++++-----
drivers/bluetooth/btbcm.h | 8 ++---
drivers/bluetooth/hci_bcm.c | 15 +++++++--
4 files changed, 48 insertions(+), 15 deletions(-)


base-commit: 48b57999e38745b707abe233019786cc097df3c9
--
2.25.1

\
 
 \ /
  Last update: 2022-05-20 17:08    [W:0.113 / U:1.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site