Messages in this thread Patch in this message | | | From | Satya Priya <> | Subject | [PATCH V13 8/9] arm64: dts: qcom: pm8008: Add base dts file | Date | Fri, 20 May 2022 16:19:36 +0530 |
| |
Add base DTS file for pm8008.
Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> --- Changes in V13: - None.
Changes in V12: - None.
Changes in V11: - Remove intermediate regulators node and add the ldos under pm8008@8 node. - change the address cells as 2 for pm8008 parent mfd node. - add compatible to register the ldos. - add reg with i2c client offset and address.
arch/arm64/boot/dts/qcom/pm8008.dtsi | 54 ++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/pm8008.dtsi
diff --git a/arch/arm64/boot/dts/qcom/pm8008.dtsi b/arch/arm64/boot/dts/qcom/pm8008.dtsi new file mode 100644 index 0000000..5606344 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8008.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: BSD-3-Clause +// Copyright (c) 2022, The Linux Foundation. All rights reserved. + +&pm8008_bus { + pm8008: pmic@8 { + compatible = "qcom,pm8008"; + reg = <0x8>; + #address-cells = <2>; + #size-cells = <0>; + #interrupt-cells = <2>; + + pm8008_l1: ldo1@1,4000 { + compatible = "qcom,pm8008-regulator"; + reg = <0x1 0x4000>; + regulator-name = "pm8008_ldo1"; + }; + + pm8008_l2: ldo2@1,4100 { + compatible = "qcom,pm8008-regulator"; + reg = <0x1 0x4100>; + regulator-name = "pm8008_ldo2"; + }; + + pm8008_l3: ldo3@1,4200 { + compatible = "qcom,pm8008-regulator"; + reg = <0x1 0x4200>; + regulator-name = "pm8008_ldo3"; + }; + + pm8008_l4: ldo4@1,4300 { + compatible = "qcom,pm8008-regulator"; + reg = <0x1 0x4300>; + regulator-name = "pm8008_ldo4"; + }; + + pm8008_l5: ldo5@1,4400 { + compatible = "qcom,pm8008-regulator"; + reg = <0x1 0x4400>; + regulator-name = "pm8008_ldo5"; + }; + + pm8008_l6: ldo6@1,4500 { + compatible = "qcom,pm8008-regulator"; + reg = <0x1 0x4500>; + regulator-name = "pm8008_ldo6"; + }; + + pm8008_l7: ldo7@1,4600 { + compatible = "qcom,pm8008-regulator"; + reg = <0x1 0x4600>; + regulator-name = "pm8008_ldo7"; + }; + }; +}; -- 2.7.4
| |