lkml.org 
[lkml]   [2022]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 00/19] Control VQ support in vDPA
On Wed, Mar 30, 2022 at 8:05 PM Gautam Dawar <gautam.dawar@xilinx.com> wrote:
>
> Hi All:
>
> This series tries to add the support for control virtqueue in vDPA.
>
> Control virtqueue is used by networking device for accepting various
> commands from the driver. It's a must to support multiqueue and other
> configurations.
>
> When used by vhost-vDPA bus driver for VM, the control virtqueue
> should be shadowed via userspace VMM (Qemu) instead of being assigned
> directly to Guest. This is because Qemu needs to know the device state
> in order to start and stop device correctly (e.g for Live Migration).
>
> This requies to isolate the memory mapping for control virtqueue
> presented by vhost-vDPA to prevent guest from accessing it directly.
>
> To achieve this, vDPA introduce two new abstractions:
>
> - address space: identified through address space id (ASID) and a set
> of memory mapping in maintained
> - virtqueue group: the minimal set of virtqueues that must share an
> address space
>
> Device needs to advertise the following attributes to vDPA:
>
> - the number of address spaces supported in the device
> - the number of virtqueue groups supported in the device
> - the mappings from a specific virtqueue to its virtqueue groups
>
> The mappings from virtqueue to virtqueue groups is fixed and defined
> by vDPA device driver. E.g:
>
> - For the device that has hardware ASID support, it can simply
> advertise a per virtqueue group.
> - For the device that does not have hardware ASID support, it can
> simply advertise a single virtqueue group that contains all
> virtqueues. Or if it wants a software emulated control virtqueue, it
> can advertise two virtqueue groups, one is for cvq, another is for
> the rest virtqueues.
>
> vDPA also allow to change the association between virtqueue group and
> address space. So in the case of control virtqueue, userspace
> VMM(Qemu) may use a dedicated address space for the control virtqueue
> group to isolate the memory mapping.
>
> The vhost/vhost-vDPA is also extend for the userspace to:
>
> - query the number of virtqueue groups and address spaces supported by
> the device
> - query the virtqueue group for a specific virtqueue
> - assocaite a virtqueue group with an address space
> - send ASID based IOTLB commands
>
> This will help userspace VMM(Qemu) to detect whether the control vq
> could be supported and isolate memory mappings of control virtqueue
> from the others.
>
> To demonstrate the usage, vDPA simulator is extended to support
> setting MAC address via a emulated control virtqueue.
>
> Please review.
>
> Changes since RFC v2:
>
> - Fixed memory leak for asid 0 in vhost_vdpa_remove_as()
> - Removed unnecessary NULL check for iotlb in vhost_vdpa_unmap() and
> changed its return type to void.
> - Removed insignificant used_as member field from struct vhost_vdpa.
> - Corrected the iommu parameter in call to vringh_set_iotlb() from
> vdpasim_set_group_asid()
> - Fixed build errors with vdpa_sim_net
> - Updated alibaba, vdpa_user and virtio_pci vdpa parent drivers to
> call updated vDPA APIs and ensured successful build
> - Tested control (MAC address configuration) and data-path using
> single virtqueue pair on Xilinx (now AMD) SN1022 SmartNIC device
> and vdpa_sim_net software device using QEMU release at [1]
> - Removed two extra blank lines after set_group_asid() in
> include/linux/vdpa.h
>
> Changes since v1:
>
> - Rebased the v1 patch series on vhost branch of MST vhost git repo
> git.kernel.org/pub/scm/linux/kernel/git/mst/vhost.git/log/?h=vhost
> - Updates to accommodate vdpa_sim changes from monolithic module in
> kernel used v1 patch series to current modularized class (net, block)
> based approach.
> - Added new attributes (ngroups and nas) to "vdpasim_dev_attr" and
> propagated them from vdpa_sim_net to vdpa_sim
> - Widened the data-type for "asid" member of vhost_msg_v2 to __u32
> to accommodate PASID
> - Fixed the buildbot warnings
> - Resolved all checkpatch.pl errors and warnings
> - Tested both control and datapath with Xilinx Smartnic SN1000 series
> device using QEMU implementing the Shadow virtqueue and support for
> VQ groups and ASID available at [1]
>
> Changes since RFC:
>
> - tweak vhost uAPI documentation
> - switch to use device specific IOTLB really in patch 4
> - tweak the commit log
> - fix that ASID in vhost is claimed to be 32 actually but 16bit
> actually
> - fix use after free when using ASID with IOTLB batching requests
> - switch to use Stefano's patch for having separated iov
> - remove unused "used_as" variable
> - fix the iotlb/asid checking in vhost_vdpa_unmap()
>
> [1] Development QEMU release with support for SVQ, VQ groups and ASID:
> github.com/eugpermar/qemu/releases/tag/vdpa_sw_live_migration.d%2F
> asid_groups-v1.d%2F00
>
> Thanks
>
> Gautam Dawar (19):
> vhost: move the backend feature bits to vhost_types.h
> virtio-vdpa: don't set callback if virtio doesn't need it
> vhost-vdpa: passing iotlb to IOMMU mapping helpers
> vhost-vdpa: switch to use vhost-vdpa specific IOTLB
> vdpa: introduce virtqueue groups
> vdpa: multiple address spaces support
> vdpa: introduce config operations for associating ASID to a virtqueue
> group
> vhost_iotlb: split out IOTLB initialization
> vhost: support ASID in IOTLB API
> vhost-vdpa: introduce asid based IOTLB
> vhost-vdpa: introduce uAPI to get the number of virtqueue groups
> vhost-vdpa: introduce uAPI to get the number of address spaces
> vhost-vdpa: uAPI to get virtqueue group id
> vhost-vdpa: introduce uAPI to set group ASID
> vhost-vdpa: support ASID based IOTLB API
> vdpa_sim: advertise VIRTIO_NET_F_MTU
> vdpa_sim: factor out buffer completion logic
> vdpa_sim: filter destination mac address
> vdpasim: control virtqueue support
>
> drivers/vdpa/alibaba/eni_vdpa.c | 2 +-
> drivers/vdpa/ifcvf/ifcvf_main.c | 8 +-
> drivers/vdpa/mlx5/net/mlx5_vnet.c | 11 +-
> drivers/vdpa/vdpa.c | 5 +
> drivers/vdpa/vdpa_sim/vdpa_sim.c | 100 ++++++++--
> drivers/vdpa/vdpa_sim/vdpa_sim.h | 3 +
> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 169 +++++++++++++----
> drivers/vdpa/vdpa_user/vduse_dev.c | 3 +-
> drivers/vdpa/virtio_pci/vp_vdpa.c | 2 +-
> drivers/vhost/iotlb.c | 23 ++-
> drivers/vhost/vdpa.c | 267 +++++++++++++++++++++------
> drivers/vhost/vhost.c | 23 ++-
> drivers/vhost/vhost.h | 4 +-
> drivers/virtio/virtio_vdpa.c | 2 +-
> include/linux/vdpa.h | 44 ++++-
> include/linux/vhost_iotlb.h | 2 +
> include/uapi/linux/vhost.h | 26 ++-
> include/uapi/linux/vhost_types.h | 11 +-
> 18 files changed, 563 insertions(+), 142 deletions(-)
>

Hoping it's not too late for this, but I tested this series with my
latest qemu CVQ SVQ RFC (v8). So, in that regard,

Reviewed-by: Eugenio Pérez <eperezma@redhat.com>

\
 
 \ /
  Last update: 2022-05-20 10:05    [W:0.266 / U:1.820 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site