lkml.org 
[lkml]   [2022]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC 2/2] usb: dwc3: Refactor PHY logic to support Multiport Controller
On Thu 19 May 05:34 PDT 2022, Harsh Agarwal wrote:

> Currently the USB driver supports only single port controller
> which works with 2 PHYs at max ie HS and SS.
>
> But some devices have "multiport" controller where a single
> controller supports multiple ports and each port have their own
> PHYs. Refactor PHY logic to support the same.
>
> This implementation is compatible with existing glue drivers.
>

I would love to see this support land, for various different devices I
have.

But can you please explain how you tested this on an upstream kernel,
given that all the Qualcomm phys are implemented in the generic phy
framework?


Also, when I spoke with Jack about this feature recently, he mentioned
that you need to update GUSB2PHYCFG(i) and GUSB3PIPECTL(i) in e.g.
dwc3_phy_config(). Is this series complete?

> Signed-off-by: Harsh Agarwal <quic_harshq@quicinc.com>
> ---
> drivers/usb/dwc3/core.c | 259 +++++++++++++++++++++++++++++++++++-----------
> drivers/usb/dwc3/core.h | 8 +-
> drivers/usb/dwc3/drd.c | 8 +-
> drivers/usb/dwc3/gadget.c | 4 +-
> 4 files changed, 209 insertions(+), 70 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 2682469..8eb6b5b6 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -189,8 +189,8 @@ static void __dwc3_set_mode(struct work_struct *work)
> if (ret) {
> dev_err(dwc->dev, "failed to initialize host\n");
> } else {
> - if (dwc->usb2_phy)
> - otg_set_vbus(dwc->usb2_phy->otg, true);
> + if (dwc->usb2_phy[0])
> + otg_set_vbus(dwc->usb2_phy[0]->otg, true);
> phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
> phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
> if (dwc->dis_split_quirk) {
> @@ -204,9 +204,13 @@ static void __dwc3_set_mode(struct work_struct *work)
> dwc3_core_soft_reset(dwc);
>
> dwc3_event_buffers_setup(dwc);
> -
> - if (dwc->usb2_phy)
> - otg_set_vbus(dwc->usb2_phy->otg, false);
> + /*
> + * Multiport Controller works only in host mode.
> + * There will only be one pair of HS and SS PHY for the controller operating in
> + * device mode.
> + */

I think this comment applies to every single place where you operate on
usb2_phy[0] only. But rather than telling the reader of the code that
multiport is valid only for host-only setups, wouldn't it be useful to
prevent the moving to device mode if multiple ports are specified?

Or am I just not finding the place where you do this?

> + if (dwc->usb2_phy[0])
> + otg_set_vbus(dwc->usb2_phy[0]->otg, false);
> phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
> phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
>
> @@ -825,15 +829,20 @@ static void dwc3_clk_disable(struct dwc3 *dwc)
>
> static void dwc3_core_exit(struct dwc3 *dwc)
> {
> + int i;
> dwc3_event_buffers_cleanup(dwc);
>
> - usb_phy_shutdown(dwc->usb2_phy);
> - usb_phy_shutdown(dwc->usb3_phy);
> + for (i = 0; i < dwc->num_hsphy; i++)
> + usb_phy_shutdown(dwc->usb2_phy[i]);
> + for (i = 0; i < dwc->num_ssphy; i++)
> + usb_phy_shutdown(dwc->usb3_phy[i]);
> phy_exit(dwc->usb2_generic_phy);
> phy_exit(dwc->usb3_generic_phy);
>
> - usb_phy_set_suspend(dwc->usb2_phy, 1);
> - usb_phy_set_suspend(dwc->usb3_phy, 1);
> + for (i = 0; i < dwc->num_hsphy; i++)
> + usb_phy_set_suspend(dwc->usb2_phy[i], 1);
> + for (i = 0; i < dwc->num_ssphy; i++)
> + usb_phy_set_suspend(dwc->usb3_phy[i], 1);
> phy_power_off(dwc->usb2_generic_phy);
> phy_power_off(dwc->usb3_generic_phy);
> dwc3_clk_disable(dwc);
> @@ -1038,7 +1047,7 @@ static int dwc3_core_init(struct dwc3 *dwc)
> {
> unsigned int hw_mode;
> u32 reg;
> - int ret;
> + int ret, i;
>
> hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
>
> @@ -1066,8 +1075,10 @@ static int dwc3_core_init(struct dwc3 *dwc)
> dwc->phys_ready = true;
> }
>
> - usb_phy_init(dwc->usb2_phy);
> - usb_phy_init(dwc->usb3_phy);
> + for (i = 0; i < dwc->num_hsphy; i++)
> + usb_phy_init(dwc->usb2_phy[i]);
> + for (i = 0; i < dwc->num_ssphy; i++)
> + usb_phy_init(dwc->usb3_phy[i]);
> ret = phy_init(dwc->usb2_generic_phy);
> if (ret < 0)
> goto err0a;
> @@ -1112,8 +1123,10 @@ static int dwc3_core_init(struct dwc3 *dwc)
>
> dwc3_set_incr_burst_type(dwc);
>
> - usb_phy_set_suspend(dwc->usb2_phy, 0);
> - usb_phy_set_suspend(dwc->usb3_phy, 0);
> + for (i = 0; i < dwc->num_hsphy; i++)
> + usb_phy_set_suspend(dwc->usb2_phy[i], 0);
> + for (i = 0; i < dwc->num_ssphy; i++)
> + usb_phy_set_suspend(dwc->usb3_phy[i], 0);
> ret = phy_power_on(dwc->usb2_generic_phy);
> if (ret < 0)
> goto err2;
> @@ -1234,12 +1247,16 @@ static int dwc3_core_init(struct dwc3 *dwc)
> phy_power_off(dwc->usb2_generic_phy);
>
> err2:
> - usb_phy_set_suspend(dwc->usb2_phy, 1);
> - usb_phy_set_suspend(dwc->usb3_phy, 1);
> + for (i = 0; i < dwc->num_hsphy; i++)
> + usb_phy_set_suspend(dwc->usb2_phy[i], 1);
> + for (i = 0; i < dwc->num_ssphy; i++)
> + usb_phy_set_suspend(dwc->usb3_phy[i], 1);
>
> err1:
> - usb_phy_shutdown(dwc->usb2_phy);
> - usb_phy_shutdown(dwc->usb3_phy);
> + for (i = 0; i < dwc->num_hsphy; i++)
> + usb_phy_shutdown(dwc->usb2_phy[i]);
> + for (i = 0; i < dwc->num_ssphy; i++)
> + usb_phy_shutdown(dwc->usb3_phy[i]);
> phy_exit(dwc->usb2_generic_phy);
> phy_exit(dwc->usb3_generic_phy);
>
> @@ -1250,52 +1267,166 @@ static int dwc3_core_init(struct dwc3 *dwc)
> return ret;
> }
>
> +static struct usb_phy *dwc3_core_get_phy_by_handle_with_node(struct device *dev,
> + const char *phandle, u8 index, struct device_node *lookup_node)
> +{
> + struct device_node *node;
> + struct usb_phy *phy;
> +
> + node = of_parse_phandle(lookup_node, phandle, index);
> + if (!node) {
> + dev_err(dev, "failed to get %s phandle in %pOF node\n", phandle,
> + dev->of_node);
> + return ERR_PTR(-ENODEV);
> + }
> + phy = devm_usb_get_phy_by_node(dev, node, NULL);
> + of_node_put(node);
> + return phy;
> +}
> +
> +static int dwc3_extract_num_phys(struct dwc3 *dwc)

This doesn't extract the number, it allocates the usb2_phy and usb3_phy
arrays.

> +{
> + struct device_node *ports, *port;
> +
> + /* Find if any "multiport" child is present inside DWC3*/
> + for_each_available_child_of_node(dwc->dev->of_node, ports) {
> + if (!strcmp(ports->name, "multiport"))
> + break;

If you break you need of_node_put().

> + }
> + if (!ports) {
> + dwc->num_hsphy = 1;
> + dwc->num_ssphy = 1;
> + } else {
> + for_each_available_child_of_node(ports, port) {
> + dwc->num_hsphy += 1;
> + dwc->num_ssphy += 1;
> + }
> + }
> + dev_info(dwc->dev, "Num of HS and SS PHY are %u %u\n", dwc->num_hsphy, dwc->num_ssphy);
> +
> + dwc->usb2_phy = devm_kzalloc(dwc->dev,
> + sizeof(*dwc->usb2_phy) * dwc->num_hsphy, GFP_KERNEL);
> + if (!dwc->usb2_phy)
> + return -ENOMEM;
> +
> + dwc->usb3_phy = devm_kzalloc(dwc->dev,
> + sizeof(*dwc->usb3_phy) * dwc->num_ssphy, GFP_KERNEL);
> + if (!dwc->usb3_phy)
> + return -ENOMEM;
> +
> + return 0;
> +}
> +
> static int dwc3_core_get_phy(struct dwc3 *dwc)
> {
> struct device *dev = dwc->dev;
> struct device_node *node = dev->of_node;
> - int ret;
> + struct device_node *ports, *port;
>
> - if (node) {
> - dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
> - dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1);
> - } else {
> - dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
> - dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
> - }
> + int ret, i = 0;
>
> - if (IS_ERR(dwc->usb2_phy)) {
> - ret = PTR_ERR(dwc->usb2_phy);
> - if (ret == -ENXIO || ret == -ENODEV)
> - dwc->usb2_phy = NULL;
> - else
> - return dev_err_probe(dev, ret, "no usb2 phy configured\n");
> + ret = dwc3_extract_num_phys(dwc);
> + if (ret) {
> + dev_err(dwc->dev, "Unable to extract number of PHYs\n");
> + return ret;
> }
>
> - if (IS_ERR(dwc->usb3_phy)) {
> - ret = PTR_ERR(dwc->usb3_phy);
> - if (ret == -ENXIO || ret == -ENODEV)
> - dwc->usb3_phy = NULL;
> - else
> - return dev_err_probe(dev, ret, "no usb3 phy configured\n");
> + /* Find if any "multiport" child is present inside DWC3*/
> + for_each_available_child_of_node(node, ports) {
> + if (!strcmp(ports->name, "multiport"))
> + break;
> }
>
> - dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
> - if (IS_ERR(dwc->usb2_generic_phy)) {
> - ret = PTR_ERR(dwc->usb2_generic_phy);
> - if (ret == -ENOSYS || ret == -ENODEV)
> - dwc->usb2_generic_phy = NULL;
> - else
> - return dev_err_probe(dev, ret, "no usb2 phy configured\n");
> - }
> + if (!ports) {
> + if (node) {
> + dwc->usb2_phy[0] = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
> + dwc->usb3_phy[0] = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1);
> + } else {
> + dwc->usb2_phy[0] = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
> + dwc->usb3_phy[0] = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
> + }
>
> - dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
> - if (IS_ERR(dwc->usb3_generic_phy)) {
> - ret = PTR_ERR(dwc->usb3_generic_phy);
> - if (ret == -ENOSYS || ret == -ENODEV)
> - dwc->usb3_generic_phy = NULL;
> - else
> - return dev_err_probe(dev, ret, "no usb3 phy configured\n");
> + if (IS_ERR(dwc->usb2_phy[0])) {
> + ret = PTR_ERR(dwc->usb2_phy[0]);
> + if (ret == -ENXIO || ret == -ENODEV)
> + dwc->usb2_phy[0] = NULL;
> + else
> + return dev_err_probe(dev, ret, "no usb2 phy configured\n");
> + }
> +
> + if (IS_ERR(dwc->usb3_phy[0])) {
> + ret = PTR_ERR(dwc->usb3_phy[0]);
> + if (ret == -ENXIO || ret == -ENODEV)
> + dwc->usb3_phy[0] = NULL;
> + else
> + return dev_err_probe(dev, ret, "no usb3 phy configured\n");
> + }
> +
> + dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
> + if (IS_ERR(dwc->usb2_generic_phy)) {
> + ret = PTR_ERR(dwc->usb2_generic_phy);
> + if (ret == -ENOSYS || ret == -ENODEV)
> + dwc->usb2_generic_phy = NULL;
> + else
> + return dev_err_probe(dev, ret, "no usb2 phy configured\n");
> + }
> +
> + dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
> + if (IS_ERR(dwc->usb3_generic_phy)) {
> + ret = PTR_ERR(dwc->usb3_generic_phy);
> + if (ret == -ENOSYS || ret == -ENODEV)
> + dwc->usb3_generic_phy = NULL;
> + else
> + return dev_err_probe(dev, ret, "no usb3 phy configured\n");
> + }
> +
> + } else {
> + pr_info("Multiport node found\n");

Please remove your debug prints.

> + /* Iterate over each port of the MultiPort */
> + for_each_available_child_of_node(ports, port) {
> + dwc->usb2_phy[i] = dwc3_core_get_phy_by_handle_with_node(dev, "usb-phy",
> + 0, port);
> + dwc->usb3_phy[i] = dwc3_core_get_phy_by_handle_with_node(dev, "usb-phy",
> + 1, port);
> +
> + if (IS_ERR(dwc->usb2_phy[i])) {
> + ret = PTR_ERR(dwc->usb2_phy[i]);
> + pr_err("usb2_phy gone %d\n", ret);
> + if (ret == -ENXIO || ret == -ENODEV)
> + dwc->usb2_phy[i] = NULL;
> + else
> + return dev_err_probe(dev, ret, "no usb2 phy configured\n");
> + }
> +
> + if (IS_ERR(dwc->usb3_phy[i])) {
> + ret = PTR_ERR(dwc->usb3_phy[i]);
> + pr_err("usb3_phy gone %d\n", ret);
> + if (ret == -ENXIO || ret == -ENODEV)
> + dwc->usb3_phy[i] = NULL;
> + else
> + return dev_err_probe(dev, ret, "no usb3 phy configured\n");
> + }
> + //TODO Write Generic PHY API

Afaict this isn't a TODO, this is just broken right now?

Regards,
Bjorn

> + dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
> + if (IS_ERR(dwc->usb2_generic_phy)) {
> + ret = PTR_ERR(dwc->usb2_generic_phy);
> + if (ret == -ENOSYS || ret == -ENODEV)
> + dwc->usb2_generic_phy = NULL;
> + else
> + return dev_err_probe(dev, ret, "no usb2 phy configured\n");
> + }
> +
> + //TODO Write Generic PHY API
> + dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
> + if (IS_ERR(dwc->usb3_generic_phy)) {
> + ret = PTR_ERR(dwc->usb3_generic_phy);
> + if (ret == -ENOSYS || ret == -ENODEV)
> + dwc->usb3_generic_phy = NULL;
> + else
> + return dev_err_probe(dev, ret, "no usb3 phy configured\n");
> + }
> + i++;
> + }
> }
>
> return 0;
> @@ -1310,8 +1441,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
> case USB_DR_MODE_PERIPHERAL:
> dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
>
> - if (dwc->usb2_phy)
> - otg_set_vbus(dwc->usb2_phy->otg, false);
> + if (dwc->usb2_phy[0])
> + otg_set_vbus(dwc->usb2_phy[0]->otg, false);
> phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
> phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
>
> @@ -1322,8 +1453,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
> case USB_DR_MODE_HOST:
> dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
>
> - if (dwc->usb2_phy)
> - otg_set_vbus(dwc->usb2_phy->otg, true);
> + if (dwc->usb2_phy[0])
> + otg_set_vbus(dwc->usb2_phy[0]->otg, true);
> phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
> phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
>
> @@ -1673,7 +1804,7 @@ static int dwc3_probe(struct platform_device *pdev)
> struct resource *res, dwc_res;
> struct dwc3 *dwc;
>
> - int ret;
> + int ret, i;
>
> void __iomem *regs;
>
> @@ -1838,13 +1969,17 @@ static int dwc3_probe(struct platform_device *pdev)
> dwc3_debugfs_exit(dwc);
> dwc3_event_buffers_cleanup(dwc);
>
> - usb_phy_shutdown(dwc->usb2_phy);
> - usb_phy_shutdown(dwc->usb3_phy);
> + for (i = 0; i < dwc->num_hsphy; i++)
> + usb_phy_shutdown(dwc->usb2_phy[i]);
> + for (i = 0; i < dwc->num_ssphy; i++)
> + usb_phy_shutdown(dwc->usb3_phy[i]);
> phy_exit(dwc->usb2_generic_phy);
> phy_exit(dwc->usb3_generic_phy);
>
> - usb_phy_set_suspend(dwc->usb2_phy, 1);
> - usb_phy_set_suspend(dwc->usb3_phy, 1);
> + for (i = 0; i < dwc->num_hsphy; i++)
> + usb_phy_set_suspend(dwc->usb2_phy[i], 1);
> + for (i = 0; i < dwc->num_ssphy; i++)
> + usb_phy_set_suspend(dwc->usb3_phy[i], 1);
> phy_power_off(dwc->usb2_generic_phy);
> phy_power_off(dwc->usb3_generic_phy);
>
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 81c486b..3175ed9 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -1020,6 +1020,8 @@ struct dwc3_scratchpad_array {
> * @usb_psy: pointer to power supply interface.
> * @usb2_phy: pointer to USB2 PHY
> * @usb3_phy: pointer to USB3 PHY
> + * @num_hsphy: Number of HS ports controlled by the core
> + * @num_dsphy: Number of SS ports controlled by the core
> * @usb2_generic_phy: pointer to USB2 PHY
> * @usb3_generic_phy: pointer to USB3 PHY
> * @phys_ready: flag to indicate that PHYs are ready
> @@ -1147,8 +1149,10 @@ struct dwc3 {
>
> struct reset_control *reset;
>
> - struct usb_phy *usb2_phy;
> - struct usb_phy *usb3_phy;
> + struct usb_phy **usb2_phy;
> + struct usb_phy **usb3_phy;
> + u32 num_hsphy;
> + u32 num_ssphy;
>
> struct phy *usb2_generic_phy;
> struct phy *usb3_generic_phy;
> diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
> index 039bf24..7c9eba6 100644
> --- a/drivers/usb/dwc3/drd.c
> +++ b/drivers/usb/dwc3/drd.c
> @@ -384,8 +384,8 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
> if (ret) {
> dev_err(dwc->dev, "failed to initialize host\n");
> } else {
> - if (dwc->usb2_phy)
> - otg_set_vbus(dwc->usb2_phy->otg, true);
> + if (dwc->usb2_phy[0])
> + otg_set_vbus(dwc->usb2_phy[0]->otg, true);
> if (dwc->usb2_generic_phy)
> phy_set_mode(dwc->usb2_generic_phy,
> PHY_MODE_USB_HOST);
> @@ -398,8 +398,8 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
> dwc3_event_buffers_setup(dwc);
> spin_unlock_irqrestore(&dwc->lock, flags);
>
> - if (dwc->usb2_phy)
> - otg_set_vbus(dwc->usb2_phy->otg, false);
> + if (dwc->usb2_phy[0])
> + otg_set_vbus(dwc->usb2_phy[0]->otg, false);
> if (dwc->usb2_generic_phy)
> phy_set_mode(dwc->usb2_generic_phy,
> PHY_MODE_USB_DEVICE);
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 4f54f0e..c58a67c 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -2870,8 +2870,8 @@ static int dwc3_gadget_vbus_draw(struct usb_gadget *g, unsigned int mA)
> union power_supply_propval val = {0};
> int ret;
>
> - if (dwc->usb2_phy)
> - return usb_phy_set_power(dwc->usb2_phy, mA);
> + if (dwc->usb2_phy[0])
> + return usb_phy_set_power(dwc->usb2_phy[0], mA);
>
> if (!dwc->usb_psy)
> return -EOPNOTSUPP;
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2022-05-21 05:16    [W:0.758 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site