lkml.org 
[lkml]   [2022]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm64: dts: intel: add device tree for n6000
On Mon, May 2, 2022 at 11:58 AM <matthew.gerlach@linux.intel.com> wrote:
>
> From: Matthew Gerlach <matthew.gerlach@linux.intel.com>
>
> Add a device tree for the n6000 instantiation of Agilex
> Hard Processor System (HPS).
>
> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
> ---
> arch/arm64/boot/dts/intel/Makefile | 1 +
> .../boot/dts/intel/socfpga_agilex_n6000.dts | 77 +++++++++++++++++++
> 2 files changed, 78 insertions(+)
> create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
>
> diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
> index 0b5477442263..1425853877cc 100644
> --- a/arch/arm64/boot/dts/intel/Makefile
> +++ b/arch/arm64/boot/dts/intel/Makefile
> @@ -1,5 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0-only
> dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_socdk.dtb \
> socfpga_agilex_socdk_nand.dtb \
> + socfpga_agilex_n6000.dtb \

Alphabetical order.

> socfpga_n5x_socdk.dtb
> dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
> diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
> new file mode 100644
> index 000000000000..07f5a5983e5c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
> @@ -0,0 +1,77 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2021-2022, Intel Corporation
> + */
> +#include "socfpga_agilex.dtsi"
> +
> +/ {
> + model = "SoCFPGA Agilex n6000";
> +
> + aliases {
> + serial0 = &uart1;
> + serial1 = &uart0;
> + ethernet0 = &gmac0;
> + ethernet1 = &gmac1;
> + ethernet2 = &gmac2;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory {
> + device_type = "memory";
> + /* We expect the bootloader to fill in the reg */
> + reg = <0 0 0 0>;
> + };
> +
> + soc {
> + clocks {
> + osc1 {
> + clock-frequency = <25000000>;
> + };
> + };
> + agilex_hps_bridges: bridge@80000000 {
> + compatible = "simple-bus";
> + reg = <0x80000000 0x60000000>,
> + <0xf9000000 0x00100000>;
> + reg-names = "axi_h2f", "axi_h2f_lw";
> + #address-cells = <0x2>;
> + #size-cells = <0x1>;
> + ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>;
> +
> + uio_cp_eng@0xf9000000 {

Unit addresses shouldn't have '0x' and the address is wrong as it
should match the child address (0). dtc will tell you this though you
need 'W=1'. Run this and schema checks and don't add new warnings.

> + compatible = "generic-uio";

NAK. Not documented and that's because this is not a h/w device.

> + reg = <0x00000000 0x00000000 0x00001000>;
> + status = "okay";

That's the default.

> + };
> + };
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&spi0 {
> + status = "okay";
> +
> + spidev: spidev@0 {
> + status = "okay";
> + compatible = "linux,spidev";
> + spi-max-frequency = <25000000>;
> + reg = <0>;
> + };
> +};
> +
> +&watchdog0 {
> + status = "okay";
> +};
> +
> +&fpga_mgr {
> + status = "disabled";
> +};
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2022-05-02 19:14    [W:0.053 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site