lkml.org 
[lkml]   [2022]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC v2 35/39] usb: handle HAS_IOPORT dependencies
From
Date
On Sat, 2022-04-30 at 08:56 -0400, Alan Stern wrote:
> On Fri, Apr 29, 2022 at 03:51:02PM +0200, Niklas Schnelle wrote:
> > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> > not being declared. We thus need to guard sections of code calling them
> > as alternative access methods with CONFIG_HAS_IOPORT checks. Similarly
> > drivers requiring these functions need to depend on HAS_IOPORT.
> >
> > Co-developed-by: Arnd Bergmann <arnd@kernel.org>
> > Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
> > ---
>
> ...
>
> > diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
> > index ef08d68b9714..4fd06b48149d 100644
> > --- a/drivers/usb/host/pci-quirks.c
> > +++ b/drivers/usb/host/pci-quirks.c
> > @@ -632,7 +590,53 @@ bool usb_amd_pt_check_port(struct device *device, int port)
> > return !(value & BIT(port_shift));
> > }
> > EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
> > +#endif
> > @@ -1273,7 +1280,8 @@ static void quirk_usb_early_handoff(struct pci_dev *pdev)
> > "Can't enable PCI device, BIOS handoff failed.\n");
> > return;
> > }
> > - if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
> > + if (IS_ENABLED(CONFIG_USB_UHCI_HCD) &&
> > + pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
> > quirk_usb_handoff_uhci(pdev);
>
> We discussed this already. quirk_usb_handoff_uhci() is supposed to be
> called even when CONFIG_USB_UHCI_HCD isn't enabled.

Sorry I missed this part. Done.

>
> ...
>
> > diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
> > index 8ae5ccd26753..be4aee1f0ca5 100644
> > --- a/drivers/usb/host/uhci-hcd.h
> > +++ b/drivers/usb/host/uhci-hcd.h
> > @@ -505,36 +505,43 @@ static inline bool uhci_is_aspeed(const struct uhci_hcd *uhci)
> > * we use memory mapped registers.
> > */
> >
> > +#ifdef CONFIG_HAS_IOPORT
> > +#define UHCI_IN(x) x
> > +#define UHCI_OUT(x) x
> > +#else
> > +#define UHCI_IN(x) 0
> > +#define UHCI_OUT(x)
> > +#endif
>
> Should have a blank line here.

Done

>
> > #ifndef CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC
> > /* Support PCI only */
> > static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
> > {
> > - return inl(uhci->io_addr + reg);
> > + return UHCI_IN(inl(uhci->io_addr + reg));
> > }
> >
> > static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
> > {
> > - outl(val, uhci->io_addr + reg);
> > + UHCI_OUT(outl(val, uhci->io_addr + reg));
> > }
> >
> > static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
> > {
> > - return inw(uhci->io_addr + reg);
> > + return UHCI_IN(inw(uhci->io_addr + reg));
> > }
> >
> > static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
> > {
> > - outw(val, uhci->io_addr + reg);
> > + UHCI_OUT(outw(val, uhci->io_addr + reg));
> > }
> >
> > static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
> > {
> > - return inb(uhci->io_addr + reg);
> > + return UHCI_IN(inb(uhci->io_addr + reg));
> > }
> >
> > static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
> > {
> > - outb(val, uhci->io_addr + reg);
> > + UHCI_OUT(outb(val, uhci->io_addr + reg));
> > }
> >
> > #else
>
> I thought you were going to update the definition of
> uhci_has_pci_registers(). It shouldn't do a test at runtime if
> CONFIG_HAS_IOPORT is disabled.
>
> Alan Stern

Good point. Done.


\
 
 \ /
  Last update: 2022-05-02 10:27    [W:0.371 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site