lkml.org 
[lkml]   [2022]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v11 1/6] clk: sunxi-ng: h6-r: Add RTC gate clock
From
Date
On 4/28/22 6:09 PM, Andre Przywara wrote:
> The H6 and H616 feature an (undocumented) bus clock gate for accessing
> the RTC registers. This seems to be enabled at reset (or by the BootROM),
> so we got away without it so far, but exists regardless.
> Since the new RTC clock binding for the H616 requires this "bus" clock
> to be specified in the DT, add this to R_CCU clock driver and expose it
> on the DT side with a new number.
> We do this for both the H6 and H616, but mark it as IGNORE_UNUSED, as we
> cannot reference it in any H6 DTs.
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Reviewed-by: Samuel Holland <samuel@sholland.org>

One tiny nit below, if you resend.

> ---
> drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 5 +++++
> drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h | 2 +-
> include/dt-bindings/clock/sun50i-h6-r-ccu.h | 1 +
> 3 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
> index 712e103382d8..88509339031e 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
> @@ -98,6 +98,8 @@ static SUNXI_CCU_GATE(r_apb1_ir_clk, "r-apb1-ir", "r-apb1",
> 0x1cc, BIT(0), 0);
> static SUNXI_CCU_GATE(r_apb1_w1_clk, "r-apb1-w1", "r-apb1",
> 0x1ec, BIT(0), 0);
> +static SUNXI_CCU_GATE(r_apb1_rtc_clk, "r-apb1-rtc", "r-apb1",
> + 0x20c, BIT(0), CLK_IGNORE_UNUSED);
>
> /* Information of IR(RX) mod clock is gathered from BSP source code */
> static const char * const r_mod0_default_parents[] = { "osc32k", "osc24M" };
> @@ -147,6 +149,7 @@ static struct ccu_common *sun50i_h616_r_ccu_clks[] = {
> &r_apb2_i2c_clk.common,
> &r_apb2_rsb_clk.common,
> &r_apb1_ir_clk.common,
> + &r_apb1_rtc_clk.common,
> &ir_clk.common,
> };
>
> @@ -163,6 +166,7 @@ static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = {
> [CLK_R_APB2_I2C] = &r_apb2_i2c_clk.common.hw,
> [CLK_R_APB2_RSB] = &r_apb2_rsb_clk.common.hw,
> [CLK_R_APB1_IR] = &r_apb1_ir_clk.common.hw,
> + [CLK_R_APB1_RTC] = &r_apb1_rtc_clk.common.hw,
> [CLK_R_APB1_W1] = &r_apb1_w1_clk.common.hw,

The new clock should go after CLK_R_APB1_W1 to match the ordering above.

> [CLK_IR] = &ir_clk.common.hw,
> [CLK_W1] = &w1_clk.common.hw,
> @@ -179,6 +183,7 @@ static struct clk_hw_onecell_data sun50i_h616_r_hw_clks = {
> [CLK_R_APB2_I2C] = &r_apb2_i2c_clk.common.hw,
> [CLK_R_APB2_RSB] = &r_apb2_rsb_clk.common.hw,
> [CLK_R_APB1_IR] = &r_apb1_ir_clk.common.hw,
> + [CLK_R_APB1_RTC] = &r_apb1_rtc_clk.common.hw,
> [CLK_IR] = &ir_clk.common.hw,
> },
> .num = CLK_NUMBER,
> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h
> index 7e290b840803..10e9b66afc6a 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h
> @@ -14,6 +14,6 @@
>
> #define CLK_R_APB2 3
>
> -#define CLK_NUMBER (CLK_R_APB2_RSB + 1)
> +#define CLK_NUMBER (CLK_R_APB1_RTC + 1)
>
> #endif /* _CCU_SUN50I_H6_R_H */
> diff --git a/include/dt-bindings/clock/sun50i-h6-r-ccu.h b/include/dt-bindings/clock/sun50i-h6-r-ccu.h
> index 890368d252c4..a96087abc86f 100644
> --- a/include/dt-bindings/clock/sun50i-h6-r-ccu.h
> +++ b/include/dt-bindings/clock/sun50i-h6-r-ccu.h
> @@ -22,5 +22,6 @@
> #define CLK_W1 12
>
> #define CLK_R_APB2_RSB 13
> +#define CLK_R_APB1_RTC 14
>
> #endif /* _DT_BINDINGS_CLK_SUN50I_H6_R_CCU_H_ */
>

\
 
 \ /
  Last update: 2022-05-03 04:08    [W:0.921 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site