lkml.org 
[lkml]   [2022]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH V4 1/1] riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL
From


On 5/18/22 23:03, Ard Biesheuvel wrote:
> On Wed, 18 May 2022 at 11:57, Sunil V L <sunilvl@ventanamicro.com> wrote:
>>
>> This patch adds the support for getting the boot hart ID in
>> Linux EFI stub using RISCV_EFI_BOOT_PROTOCOL. This protocol
>> is preferred method over existing DT based solution since it
>> works irrespective of DT or ACPI.
>>
>> The specification of the protocol is hosted at:
>> https://github.com/riscv-non-isa/riscv-uefi
>>
>> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
>> Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
>> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
>> ---
>> drivers/firmware/efi/libstub/efistub.h | 7 ++++++
>> drivers/firmware/efi/libstub/riscv-stub.c | 29 +++++++++++++++++++----
>> include/linux/efi.h | 1 +
>> 3 files changed, 32 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
>> index edb77b0621ea..aced62a0907e 100644
>> --- a/drivers/firmware/efi/libstub/efistub.h
>> +++ b/drivers/firmware/efi/libstub/efistub.h
>> @@ -720,6 +720,13 @@ union efi_tcg2_protocol {
>> } mixed_mode;
>> };
>>
>> +struct riscv_efi_boot_protocol {
>> + u64 revision;
>> +
>> + efi_status_t (__efiapi * get_boot_hartid)(struct riscv_efi_boot_protocol *this,
>> + size_t *boot_hartid);
>
> size_t is not a EFI type, and your spec uses UINTN here, which is
> equivalent to 'unsigned long'. However, jump_kernel_func() takes a
> unsigned int for the hartid. Please clean this up.

unsigned long and size_t have the same number of bits. This seems to be
a question of taste where we should follow the maintainer.

jump_kernel_func() assuming boot hart ID to be an unsigned int is not in
line with the RISC-V ISA which allows to use all xlen bits.

>
>
>> +};
>> +
>> typedef union efi_load_file_protocol efi_load_file_protocol_t;
>> typedef union efi_load_file_protocol efi_load_file2_protocol_t;
>>
>> diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c
>> index 9c460843442f..012504f6f9a4 100644
>> --- a/drivers/firmware/efi/libstub/riscv-stub.c
>> +++ b/drivers/firmware/efi/libstub/riscv-stub.c
>> @@ -23,7 +23,7 @@
>>
>> typedef void __noreturn (*jump_kernel_func)(unsigned int, unsigned long);
>>
>> -static u32 hartid;
>> +static size_t hartid;
>>
>
> and here
>
>> static int get_boot_hartid_from_fdt(void)
>> {
>> @@ -47,14 +47,33 @@ static int get_boot_hartid_from_fdt(void)
>> return 0;
>> }
>>
>> +static efi_status_t get_boot_hartid_from_efi(void)
>> +{
>> + efi_guid_t boot_protocol_guid = RISCV_EFI_BOOT_PROTOCOL_GUID;
>> + efi_status_t status;
>> + struct riscv_efi_boot_protocol *boot_protocol;
>> +
>> + status = efi_bs_call(locate_protocol, &boot_protocol_guid, NULL,
>> + (void **)&boot_protocol);
>> + if (status == EFI_SUCCESS) {
>> + status = efi_call_proto(boot_protocol,
>> + get_boot_hartid, &hartid);

A lot of the kernel code seems to be unfit to handle hart IDs exceeding
INT_MAX (e.g. sbi_cpu_is_stopped()). Until this is fixed we have to
treat hartid > INT_MAX as an error.

Best regards

Heinrich

>> + }
>> + return status;
>> +}
>> +
>> efi_status_t check_platform_features(void)
>> {
>> int ret;
>> + efi_status_t status;
>>
>> - ret = get_boot_hartid_from_fdt();
>> - if (ret) {
>> - efi_err("/chosen/boot-hartid missing or invalid!\n");
>> - return EFI_UNSUPPORTED;
>> + status = get_boot_hartid_from_efi();
>> + if (status != EFI_SUCCESS) {
>> + ret = get_boot_hartid_from_fdt();
>> + if (ret) {
>> + efi_err("Failed to get boot hartid!\n");
>> + return EFI_UNSUPPORTED;
>> + }
>> }
>> return EFI_SUCCESS;
>> }
>> diff --git a/include/linux/efi.h b/include/linux/efi.h
>> index ccd4d3f91c98..9822c730207c 100644
>> --- a/include/linux/efi.h
>> +++ b/include/linux/efi.h
>> @@ -380,6 +380,7 @@ void efi_native_runtime_setup(void);
>> #define EFI_CONSOLE_OUT_DEVICE_GUID EFI_GUID(0xd3b36f2c, 0xd551, 0x11d4, 0x9a, 0x46, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d)
>> #define APPLE_PROPERTIES_PROTOCOL_GUID EFI_GUID(0x91bd12fe, 0xf6c3, 0x44fb, 0xa5, 0xb7, 0x51, 0x22, 0xab, 0x30, 0x3a, 0xe0)
>> #define EFI_TCG2_PROTOCOL_GUID EFI_GUID(0x607f766c, 0x7455, 0x42be, 0x93, 0x0b, 0xe4, 0xd7, 0x6d, 0xb2, 0x72, 0x0f)
>> +#define RISCV_EFI_BOOT_PROTOCOL_GUID EFI_GUID(0xccd15fec, 0x6f73, 0x4eec, 0x83, 0x95, 0x3e, 0x69, 0xe4, 0xb9, 0x40, 0xbf)
>> #define EFI_LOAD_FILE_PROTOCOL_GUID EFI_GUID(0x56ec3091, 0x954c, 0x11d2, 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b)
>> #define EFI_LOAD_FILE2_PROTOCOL_GUID EFI_GUID(0x4006c0c1, 0xfcb3, 0x403e, 0x99, 0x6d, 0x4a, 0x6c, 0x87, 0x24, 0xe0, 0x6d)
>> #define EFI_RT_PROPERTIES_TABLE_GUID EFI_GUID(0xeb66918a, 0x7eef, 0x402a, 0x84, 0x2e, 0x93, 0x1d, 0x21, 0xc3, 0x8a, 0xe9)
>> --
>> 2.25.1
>>

\
 
 \ /
  Last update: 2022-05-19 08:17    [W:0.086 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site