lkml.org 
[lkml]   [2022]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] x86/sgx: Set active memcg prior to shmem allocation
From
Date
On Wed, 2022-05-18 at 04:24 +0300, Jarkko Sakkinen wrote:
> On Tue, 2022-05-17 at 09:47 -0700, Kristen Carlson Accardi wrote:
> > When the system runs out of enclave memory, SGX can reclaim EPC
> > pages
> > by swapping to normal RAM. These backing pages are allocated via a
> > per-enclave shared memory area. Since SGX allows unlimited over
> > commit on EPC memory, the reclaimer thread can allocate a large
> > number of backing RAM pages in response to EPC memory pressure.
> >
> > When the shared memory backing RAM allocation occurs during
> > the reclaimer thread context, the shared memory is charged to
> > the root memory control group, and the shmem usage of the enclave
> > is not properly accounted for, making cgroups ineffective at
> > limiting the amount of RAM an enclave can consume.
> >
> > For example, when using a cgroup to launch a set of test
> > enclaves, the kernel does not properly account for 50% - 75% of
> > shmem page allocations on average. In the worst case, when
> > nearly all allocations occur during the reclaimer thread, the
> > kernel accounts less than a percent of the amount of shmem used
> > by the enclave's cgroup to the correct cgroup.
> >
> > SGX currently stores a list of mm_structs that are associated with
> > an enclave. In order to allow the enclave's cgroup to more
> > accurately
> > reflect the shmem usage, the memory control group (struct
> > mem_cgroup)
> > of one of these mm_structs can be set as the active memory cgroup
> > prior to allocating any EPC backing pages. This will make any shmem
> > allocations be charged to a memory control group associated with
> > the
> > enclave's cgroup. This will allow memory cgroup limits to restrict
> > RAM usage more effectively.
> >
> > This patch will create a new function - sgx_encl_alloc_backing().
> > This function will be used whenever a new backing storage page
> > needs to be allocated. Previously the same function was used for
> > page allocation as well as retrieving a previously allocated page.
> > Prior to backing page allocation, if there is a mm_struct
> > associated
> > with the enclave that is requesting the allocation, it will be set
> > as the active memory control group.
> >
> > Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
> > ---
> > arch/x86/kernel/cpu/sgx/encl.c | 111
> > ++++++++++++++++++++++++++++++++-
> > arch/x86/kernel/cpu/sgx/encl.h | 6 +-
> > arch/x86/kernel/cpu/sgx/main.c | 4 +-
> > 3 files changed, 115 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/x86/kernel/cpu/sgx/encl.c
> > b/arch/x86/kernel/cpu/sgx/encl.c
> > index 001808e3901c..c3a5e57040bc 100644
> > --- a/arch/x86/kernel/cpu/sgx/encl.c
> > +++ b/arch/x86/kernel/cpu/sgx/encl.c
> > @@ -32,7 +32,7 @@ static int __sgx_encl_eldu(struct sgx_encl_page
> > *encl_page,
> > else
> > page_index = PFN_DOWN(encl->size);
> >
> > - ret = sgx_encl_get_backing(encl, page_index, &b);
> > + ret = sgx_encl_lookup_backing(encl, page_index, &b);
> > if (ret)
> > return ret;
> >
> > @@ -574,7 +574,7 @@ static struct page
> > *sgx_encl_get_backing_page(struct sgx_encl *encl,
> > * 0 on success,
> > * -errno otherwise.
> > */
> > -int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long
> > page_index,
> > +static int sgx_encl_get_backing(struct sgx_encl *encl, unsigned
> > long page_index,
> > struct sgx_backing *backing)
> > {
> > pgoff_t pcmd_index = PFN_DOWN(encl->size) + 1 + (page_index
> > >> 5);
> > @@ -601,6 +601,113 @@ int sgx_encl_get_backing(struct sgx_encl
> > *encl, unsigned long page_index,
> > return 0;
> > }
> >
> > +static struct mem_cgroup * sgx_encl_set_active_memcg(struct
> > sgx_encl *encl)
> > +{
> > + struct mm_struct *mm = current->mm;
> > + struct sgx_encl_mm *encl_mm;
> > + struct mem_cgroup *memcg;
> > + int idx;
> > +
> > + /*
> > + * If current->mm is NULL, get_mem_cgroup_from_mm() will
> > return
> > + * the currently active mem_cgroup. This may be the root
> > mem_cgroup
> > + * if there is no active mem_cgroup set.
> > + */
> > + memcg = get_mem_cgroup_from_mm(mm);
> > +
> > + /*
> > + * If we already have an mm, we are not in thread context
> > and the
> > + * mem_cgroup for the enclave will be charged for any
> > allocations.
> > + */
>
> AFAIK CPU is always executing in some thread.
>
> This would a lot clearer:
>
> /*
> * If the CPU is not inside a kthread, return the active memcg.
> */
>
> Please remark of not using "we" in my version. It's better to be
> explicit when you can.

Thank you for your feedback. I've incorporated it into my next version.

Kristen


\
 
 \ /
  Last update: 2022-05-19 22:48    [W:1.100 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site