lkml.org 
[lkml]   [2022]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 0/3] FUSE: Implement atomic lookup + open/create
On Thu, May 19, 2022 at 11:39:01AM +0200, Miklos Szeredi wrote:
> On Tue, 17 May 2022 at 12:08, Dharmendra Singh <dharamhans87@gmail.com> wrote:
> >
> > In FUSE, as of now, uncached lookups are expensive over the wire.
> > E.g additional latencies and stressing (meta data) servers from
> > thousands of clients. These lookup calls possibly can be avoided
> > in some cases. Incoming three patches address this issue.
> >
> >
> > Fist patch handles the case where we are creating a file with O_CREAT.
> > Before we go for file creation, we do a lookup on the file which is most
> > likely non-existent. After this lookup is done, we again go into libfuse
> > to create file. Such lookups where file is most likely non-existent, can
> > be avoided.
>
> I'd really like to see a bit wider picture...
>
> We have several cases, first of all let's look at plain O_CREAT
> without O_EXCL (assume that there were no changes since the last
> lookup for simplicity):

Hi Miklos,

Thanks for providing this breakup. There are too many cases here and
this data helps a lot with that. I feel this should really be captured
in commit logs to show the current paths and how these have been
optimized with ATOMIC_OPEN/CREATE_EXT.

>
> [not cached, negative]
> ->atomic_open()
> LOOKUP
> CREATE
>
> [not cached, positive]
> ->atomic_open()
> LOOKUP
> ->open()
> OPEN
>
> [cached, negative, validity timeout not expired]
> ->d_revalidate()
> return 1
> ->atomic_open()
> CREATE
>
> [cached, negative, validity timeout expired]
> ->d_revalidate()
> return 0
> ->atomic_open()
> LOOKUP
> CREATE
>
> [cached, positive, validity timeout not expired]
> ->d_revalidate()
> return 1
> ->open()
> OPEN
>
> [cached, positive, validity timeout expired]
> ->d_revalidate()
> LOOKUP
> return 1
> ->open()
> OPEN
>
> (Caveat emptor: I'm just looking at the code and haven't actually
> tested what happens.)
>
> Apparently in all of these cases we are doing at least one request, so
> it would make sense to make them uniform:
>
> [not cached]
> ->atomic_open()
> CREATE_EXT
>
> [cached]
> ->d_revalidate()
> return 0

So fuse_dentry_revalidate() will return 0 even if timeout has not
expired (if server supports so called atomic_open()).
And that will lead to calling d_invalidate() on existing positive dentry
always. IOW, if I am calling open() on a dentry, dentry will always be
dropped and a new dentry will always be created from ->atomic_open() path,
is that right.

I am not sure what does it mean from VFS perspective to always call
d_invalidate() on a cached positive dentry when open() is called.

/**
* d_invalidate - detach submounts, prune dcache, and drop
* @dentry: dentry to invalidate (aka detach, prune and drop)
*/

Thanks
Vivek

> ->atomic_open()
> CREATE_EXT
>
> Similarly we can look at the current O_CREAT | O_EXCL cases:
>
> [not cached, negative]
> ->atomic_open()
> LOOKUP
> CREATE
>
> [not cached, positive]
> ->atomic_open()
> LOOKUP
> return -EEXIST
>
> [cached, negative]
> ->d_revalidate()
> return 0 (see LOOKUP_EXCL check)
> ->atomic_open()
> LOOKUP
> CREATE
>
> [cached, positive]
> ->d_revalidate()
> LOOKUP
> return 1
> return -EEXIST
>
> Again we are doing at least one request, so we can unconditionally
> replace them with CREATE_EXT like the non-O_EXCL case.
>
>
> >
> > Second patch handles the case where we open first time a file/dir
> > but do a lookup first on it. After lookup is performed we make another
> > call into libfuse to open the file. Now these two separate calls into
> > libfuse can be combined and performed as a single call into libfuse.
>
> And here's my analysis:
>
> [not cached, negative]
> ->lookup()
> LOOKUP
> return -ENOENT
>
> [not cached, positive]
> ->lookup()
> LOOKUP
> ->open()
> OPEN
>
> [cached, negative, validity timeout not expired]
> ->d_revalidate()
> return 1
> return -ENOENT
>
> [cached, negative, validity timeout expired]
> ->d_revalidate()
> return 0
> ->atomic_open()
> LOOKUP
> return -ENOENT
>
> [cached, positive, validity timeout not expired]
> ->d_revalidate()
> return 1
> ->open()
> OPEN
>
> [cached, positive, validity timeout expired]
> ->d_revalidate()
> LOOKUP
> return 1
> ->open()
> OPEN
>
> There's one case were no request is sent: a valid cached negative
> dentry. Possibly we can also make this uniform, e.g.:
>
> [not cached]
> ->atomic_open()
> OPEN_ATOMIC
>
> [cached, negative, validity timeout not expired]
> ->d_revalidate()
> return 1
> return -ENOENT
>
> [cached, negative, validity timeout expired]
> ->d_revalidate()
> return 0
> ->atomic_open()
> OPEN_ATOMIC
>
> [cached, positive]
> ->d_revalidate()
> return 0
> ->atomic_open()
> OPEN_ATOMIC
>
> It may even make the code simpler to clearly separate the cases where
> the atomic variants are supported and when not. I'd also consider
> merging CREATE_EXT into OPEN_ATOMIC, since a filesystem implementing
> one will highly likely want to implement the other as well.
>
> Thanks,
> Miklos
>

\
 
 \ /
  Last update: 2022-05-19 21:34    [W:1.398 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site