lkml.org 
[lkml]   [2022]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 17/17] ALSA: hda: cs35l41: Add module parameter to control firmware load
Date
From: Stefan Binding <sbinding@opensource.cirrus.com>

By default, the driver will automatically load DSP firmware
for the amps, if available. Adding this option allows the
autoload to be optional, which allows for different configurations.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
---

Changes since v2:
- Added module paramter to control firmware loading

sound/pci/hda/cs35l41_hda.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
index 06abd03e2996..8aea09870bc2 100644
--- a/sound/pci/hda/cs35l41_hda.c
+++ b/sound/pci/hda/cs35l41_hda.c
@@ -30,6 +30,11 @@
#define CAL_R_DSP_CTL_TYPE 5
#define CAL_R_DSP_CTL_ALG 205

+static bool firmware_autostart = 1;
+module_param(firmware_autostart, bool, 0444);
+MODULE_PARM_DESC(firmware_autostart, "Allow automatic firmware download on boot"
+ "(0=Disable, 1=Enable) (default=1); ");
+
static const struct reg_sequence cs35l41_hda_config[] = {
{ CS35L41_PLL_CLK_CTRL, 0x00000430 }, // 3072000Hz, BCLK Input, PLL_REFCLK_EN = 1
{ CS35L41_DSP_CLK_CTRL, 0x00000003 }, // DSP CLK EN
@@ -779,11 +784,16 @@ static int cs35l41_hda_bind(struct device *dev, struct device *master, void *mas

cs35l41->firmware_type = HDA_CS_DSP_FW_SPK_PROT;

- cs35l41->request_fw_load = true;
- mutex_lock(&cs35l41->fw_mutex);
- if (cs35l41_smart_amp(cs35l41) < 0)
- dev_warn(cs35l41->dev, "Cannot Run Firmware, reverting to dsp bypass...\n");
- mutex_unlock(&cs35l41->fw_mutex);
+ if (firmware_autostart) {
+ dev_dbg(cs35l41->dev, "Firmware Autostart.\n");
+ cs35l41->request_fw_load = true;
+ mutex_lock(&cs35l41->fw_mutex);
+ if (cs35l41_smart_amp(cs35l41) < 0)
+ dev_warn(cs35l41->dev, "Cannot Run Firmware, reverting to dsp bypass...\n");
+ mutex_unlock(&cs35l41->fw_mutex);
+ } else {
+ dev_dbg(cs35l41->dev, "Firmware Autostart is disabled.\n");
+ }

cs35l41_create_controls(cs35l41);

--
2.34.1
\
 
 \ /
  Last update: 2022-05-19 19:50    [W:0.138 / U:1.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site