lkml.org 
[lkml]   [2022]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 2/6] iio: accel: bmi088: Make it possible to config scales
Date
The sensor can set the scales by writing the range register 0x41,
The current driver has no interface to configure it.
The commit adds the interface for config the scales.

Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
---
drivers/iio/accel/bmi088-accel-core.c | 33 ++++++++++++++++++++++++++-
1 file changed, 32 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/accel/bmi088-accel-core.c b/drivers/iio/accel/bmi088-accel-core.c
index 21bddee869af..563bcc311844 100644
--- a/drivers/iio/accel/bmi088-accel-core.c
+++ b/drivers/iio/accel/bmi088-accel-core.c
@@ -239,6 +239,21 @@ static int bmi088_accel_set_sample_freq(struct bmi088_accel_data *data, int val)
BMI088_ACCEL_MODE_ODR_MASK, regval);
}

+static int bmi088_accel_set_scale(struct bmi088_accel_data *data, int val, int val2)
+{
+ unsigned int i;
+
+ for (i = 0; i < 4; i++)
+ if (val == data->chip_info->scale_table[i][0] &&
+ val2 == data->chip_info->scale_table[i][1])
+ break;
+
+ if (i == 4)
+ return -EINVAL;
+
+ return regmap_write(data->regmap, BMI088_ACCEL_REG_ACC_RANGE, i);
+}
+
static int bmi088_accel_get_temp(struct bmi088_accel_data *data, int *val)
{
int ret;
@@ -372,7 +387,13 @@ static int bmi088_accel_read_avail(struct iio_dev *indio_dev,
const int **vals, int *type, int *length,
long mask)
{
+ struct bmi088_accel_data *data = iio_priv(indio_dev);
switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ *vals = (const int *)data->chip_info->scale_table;
+ *length = 8;
+ *type = IIO_VAL_INT_PLUS_MICRO;
+ return IIO_AVAIL_LIST;
case IIO_CHAN_INFO_SAMP_FREQ:
*type = IIO_VAL_INT_PLUS_MICRO;
*vals = bmi088_sample_freqs;
@@ -392,6 +413,15 @@ static int bmi088_accel_write_raw(struct iio_dev *indio_dev,
int ret;

switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret)
+ return ret;
+
+ ret = bmi088_accel_set_scale(data, val, val2);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+ return ret;
case IIO_CHAN_INFO_SAMP_FREQ:
ret = pm_runtime_resume_and_get(dev);
if (ret)
@@ -413,7 +443,8 @@ static int bmi088_accel_write_raw(struct iio_dev *indio_dev,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
- .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_SCALE), \
.scan_index = AXIS_##_axis, \
}

--
2.25.1
\
 
 \ /
  Last update: 2022-05-18 17:09    [W:0.096 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site