lkml.org 
[lkml]   [2022]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1 11/17] ARM: dts: imx6q-apalis: Add ov5640 mipi csi camera
Hi Max,

On Wed, May 18, 2022 at 11:21 AM Max Krummenacher <max.oss.09@gmail.com> wrote:

> In my (limited) testing I saw no issues that the camera would not come up.
> It takes 2 to 3 seconds until the pipeline is running but I noted no hickups.
> I did this with setting the resolution to 640x480 and 1920x1080 which
> probably would not relate to the LP-11 issue you mention.
>
> I.e. I set up the v4l2 pipeline and start capture to the screen as follows:

Just curious: which baseboard did you use to test the ov5640 camera?

Most likely there was an issue with the customer's baseboard that
prevented the camera capture to start.

Thanks

\
 
 \ /
  Last update: 2022-05-18 16:25    [W:0.062 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site