lkml.org 
[lkml]   [2022]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/3] PCI: qcom: Add system PM support
On Wed, May 18, 2022 at 03:23:58PM +0200, Christoph Hellwig wrote:
> On Wed, May 18, 2022 at 06:49:13PM +0530, Manivannan Sadhasivam wrote:
> > From: Prasad Malisetty <quic_pmaliset@quicinc.com>
> >
> > Add suspend and resume callbacks to handle system suspend and resume in
> > the Qcom PCIe controller driver. When the system suspends, PME turnoff
> > message will be sent to the device and the RC driver will wait for the
> > device to enter L23 Ready state. After that, the PHY will be powered down
> > and clocks/regulators will be disabled.
>
> So what about just not doing this stupid power disabling to start
> with? Unlike x86 where we do not have choice due to the BIOS, we
> apparently do here. And disabling power is the wrong thing to do at
> least for SSDs as it massively increases the wear on the NAND.

That's the requirement the Chromebook based on SC7280 has. I will check
internally and get back.

Thanks,
Mani

--
மணிவண்ணன் சதாசிவம்

\
 
 \ /
  Last update: 2022-05-18 15:33    [W:0.044 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site