lkml.org 
[lkml]   [2022]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 2/3] phy/qualcomm: add regulator_set_load to dp phy
On Thu, 19 May 2022 at 00:36, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote:
>
> This patch add regulator_set_load() before enable regulator at
> DP phy driver.
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index b144ae1..20ac446 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -3130,6 +3130,7 @@ struct qmp_phy_cfg {
> int num_resets;
> /* regulators to be requested */
> const char * const *vreg_list;
> + const unsigned int *vreg_enable_load;
> int num_vregs;
>
> /* array of registers with different offsets */
> @@ -3346,6 +3347,10 @@ static const char * const qmp_phy_vreg_l[] = {
> "vdda-phy", "vdda-pll",
> };
>
> +static const unsigned int qmp_phy_vreg_enable_load[] = {
> + 21800, 36000
> +};
> +
> static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
> .type = PHY_TYPE_USB3,
> .nlanes = 1,
> @@ -4072,6 +4077,7 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
> .reset_list = msm8996_usb3phy_reset_l,
> .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> .vreg_list = qmp_phy_vreg_l,
> + .vreg_enable_load = qmp_phy_vreg_enable_load,
> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = qmp_v4_usb3phy_regs_layout,
>
> @@ -4139,6 +4145,7 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
> .reset_list = msm8996_usb3phy_reset_l,
> .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> .vreg_list = qmp_phy_vreg_l,
> + .vreg_enable_load = qmp_phy_vreg_enable_load,
> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = qmp_v4_usb3phy_regs_layout,

I'd ask again: what about the sdm845? SC8180x? SC7180? Do we need to
change them too?
Currently they will all be handled by the DP driver.

>
> @@ -5008,6 +5015,11 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
> return 0;
> }
>
> + if (cfg->vreg_enable_load) {
> + for (i = cfg->num_vregs - 1; i >= 0; --i)
> + regulator_set_load(qmp->vregs[i].consumer, cfg->vreg_enable_load[i]);
> + }
> +
> /* turn on regulator supplies */
> ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
> if (ret) {
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>


--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2022-05-19 00:27    [W:0.072 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site