lkml.org 
[lkml]   [2022]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 2/3] ARM: dts: aspeed: Add USB2.0 device controller node
From
On 17/05/2022 16:50, Neal Liu wrote:
>> -----Original Message-----
>> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> Sent: Tuesday, May 17, 2022 8:00 PM
>> To: Neal Liu <neal_liu@aspeedtech.com>; Greg Kroah-Hartman
>> <gregkh@linuxfoundation.org>; Rob Herring <robh+dt@kernel.org>; Krzysztof
>> Kozlowski <krzysztof.kozlowski+dt@linaro.org>; Joel Stanley <joel@jms.id.au>;
>> Andrew Jeffery <andrew@aj.id.au>; Felipe Balbi <balbi@kernel.org>; Sumit
>> Semwal <sumit.semwal@linaro.org>; Christian König
>> <christian.koenig@amd.com>; Geert Uytterhoeven <geert@linux-m68k.org>;
>> Li Yang <leoyang.li@nxp.com>
>> Cc: linux-aspeed@lists.ozlabs.org; linux-usb@vger.kernel.org;
>> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
>> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
>> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
>> Subject: Re: [PATCH v2 2/3] ARM: dts: aspeed: Add USB2.0 device controller
>> node
>>
>> On 17/05/2022 10:25, Neal Liu wrote:
>>> Add USB2.0 device controller(udc) node to device tree for AST2600.
>>>
>>> Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
>>> ---
>>> arch/arm/boot/dts/aspeed-g6.dtsi | 10 ++++++++++
>>> 1 file changed, 10 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi
>>> b/arch/arm/boot/dts/aspeed-g6.dtsi
>>> index 3d5ce9da42c3..5517313eb2b5 100644
>>> --- a/arch/arm/boot/dts/aspeed-g6.dtsi
>>> +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
>>> @@ -298,6 +298,16 @@ vhub: usb-vhub@1e6a0000 {
>>> status = "disabled";
>>> };
>>>
>>> + udc: udc@1e6a2000 {
>>
>> The same as DTS in bindings - generic node name, please.
>>
>
> Is it possible to use "udc: usb-udc@1e6a2000" to distinguish it between "vhub: usb-vhub@1e6a0000"?

Possible yes :), but not recommended and not wanted. Nodes should be
generic and prefixes are added only if there is no unit address. You can
though use some more descriptive label.


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-05-17 16:54    [W:0.190 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site