lkml.org 
[lkml]   [2022]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/9] serial: rda-uart: Don't allow CS5-6
Date
Only CS7 and CS8 are supported but CSIZE is not sanitized after
fallthrough from CS5 or CS6 to CS7.

Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Cc: Manivannan Sadhasivam <mani@kernel.org>
Fixes: c10b13325ced (tty: serial: Add RDA8810PL UART driver)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/tty/serial/rda-uart.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c
index e5f1fded423a..f556b4955f59 100644
--- a/drivers/tty/serial/rda-uart.c
+++ b/drivers/tty/serial/rda-uart.c
@@ -262,6 +262,8 @@ static void rda_uart_set_termios(struct uart_port *port,
fallthrough;
case CS7:
ctrl &= ~RDA_UART_DBITS_8;
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= CS7;
break;
default:
ctrl |= RDA_UART_DBITS_8;
--
2.30.2
\
 
 \ /
  Last update: 2022-05-17 13:10    [W:0.033 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site