lkml.org 
[lkml]   [2022]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 2/2] iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
From
On 5/16/22 22:39, Yannick Brosseau wrote:
> The check for spurious IRQs introduced in 695e2f5c289bb assumed that the bits
> in the control and status registers are aligned. This is true for the H7 and MP1
> version, but not the F4. The interrupt was then never handled on the F4.
>
> Instead of increasing the complexity of the comparison and check each bit specifically,
> we remove this check completely and rely on the generic handler for spurious IRQs.
>
> Fixes: 695e2f5c289b ("iio: adc: stm32-adc: fix a regression when using dma and irq")
> Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>

Hi Yannick,

Feel free to add my:

Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>

Thanks,
Fabrice

> ---
> drivers/iio/adc/stm32-adc.c | 10 ----------
> 1 file changed, 10 deletions(-)
>
> diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> index a68ecbda6480..8c5f05f593ab 100644
> --- a/drivers/iio/adc/stm32-adc.c
> +++ b/drivers/iio/adc/stm32-adc.c
> @@ -1407,7 +1407,6 @@ static irqreturn_t stm32_adc_threaded_isr(int irq, void *data)
> struct stm32_adc *adc = iio_priv(indio_dev);
> const struct stm32_adc_regspec *regs = adc->cfg->regs;
> u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg);
> - u32 mask = stm32_adc_readl(adc, regs->ier_eoc.reg);
>
> /* Check ovr status right now, as ovr mask should be already disabled */
> if (status & regs->isr_ovr.mask) {
> @@ -1422,11 +1421,6 @@ static irqreturn_t stm32_adc_threaded_isr(int irq, void *data)
> return IRQ_HANDLED;
> }
>
> - if (!(status & mask))
> - dev_err_ratelimited(&indio_dev->dev,
> - "Unexpected IRQ: IER=0x%08x, ISR=0x%08x\n",
> - mask, status);
> -
> return IRQ_NONE;
> }
>
> @@ -1436,10 +1430,6 @@ static irqreturn_t stm32_adc_isr(int irq, void *data)
> struct stm32_adc *adc = iio_priv(indio_dev);
> const struct stm32_adc_regspec *regs = adc->cfg->regs;
> u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg);
> - u32 mask = stm32_adc_readl(adc, regs->ier_eoc.reg);
> -
> - if (!(status & mask))
> - return IRQ_WAKE_THREAD;
>
> if (status & regs->isr_ovr.mask) {
> /*

\
 
 \ /
  Last update: 2022-05-17 10:58    [W:0.083 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site