lkml.org 
[lkml]   [2022]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Re: [PATCH v3 1/6] dt-bindings: net: dsa: convert binding for mediatek switches
On Wed, May 11, 2022 at 10:02:45AM +0200, Frank Wunderlich wrote:
> Hi
>
> thanks for review
>
> > Gesendet: Dienstag, 10. Mai 2022 um 20:44 Uhr
> > Von: "Rob Herring" <robh@kernel.org>
> > On Sat, May 07, 2022 at 07:04:35PM +0200, Frank Wunderlich wrote:
> > > From: Frank Wunderlich <frank-w@public-files.de>
>
> > > +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>
> > > +properties:
> > > + compatible:
> > > + enum:
> > > + - mediatek,mt7530
> > > + - mediatek,mt7531
> > > + - mediatek,mt7621
> > > +
> >
> > > + "#address-cells":
> > > + const: 1
> > > +
> > > + "#size-cells":
> > > + const: 0
> >
> > I don't see any child nodes with addresses, so these can be removed.
>
> dropping this (and address-cells/size-cells from examples) causes errors like this (address-/size-cells set in mdio
> node, so imho it should inherite):

I think you are off a level.


> Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.example.dts:34.25-35: Warning (reg_format):
> /example-0/mdio/switch@0/ports/port@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)

That's for yet another level where 'ports' node need the properties.

> Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
>
> > > + interrupt-controller:
> > > + type: boolean
> >
> > Already has a type. Just:
> >
> > interrupt-controller: true
> >
> > > +
> > > + interrupts:
> > > + maxItems: 1
>
> > > +patternProperties:
> > > + "^(ethernet-)?ports$":
> > > + type: object
> >
> > additionalProperties: false
>
> imho this will block address-/size-cells from this level too. looks like it is needed here too (for port-regs).
>
> > > +
> > > + patternProperties:
> > > + "^(ethernet-)?port@[0-9]+$":
> > > + type: object
> > > + description: Ethernet switch ports
> > > +
> > > + unevaluatedProperties: false
> > > +
> > > + properties:
> > > + reg:
> > > + description:
> > > + Port address described must be 5 or 6 for CPU port and from 0
> > > + to 5 for user ports.
> > > +
> > > + allOf:
> > > + - $ref: dsa-port.yaml#
> > > + - if:
> > > + properties:
> > > + label:
> > > + items:
> > > + - const: cpu
> > > + then:
> > > + required:
> > > + - reg
> > > + - phy-mode
> > > +
>
> > > + - if:
> > > + required:
> > > + - interrupt-controller
> > > + then:
> > > + required:
> > > + - interrupts
> >
> > This can be expressed as:
> >
> > dependencies:
> > interrupt-controller: [ interrupts ]
>
> ok, i will change this
>
> > > + ports {
> >
> > Use the preferred form: ethernet-ports
>
> current implementation in all existing dts and examples from old binding are "ports" only.
> should they changed too?

They don't have to be the schema allows both, but the example should be
best practice.

Rob

\
 
 \ /
  Last update: 2022-05-18 03:56    [W:0.060 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site