lkml.org 
[lkml]   [2022]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] PCI/AER: Handle Multi UnCorrectable/Correctable errors properly
On Wed, May 11, 2022 at 05:29:45PM -0700, Sathyanarayanan Kuppuswamy wrote:
>
>
> On 5/11/22 4:40 PM, Bjorn Helgaas wrote:
> > On Mon, Apr 18, 2022 at 03:02:37PM +0000, Kuppuswamy Sathyanarayanan wrote:
> > > Currently the aer_irq() handler returns IRQ_NONE for cases without bits
> > > PCI_ERR_ROOT_UNCOR_RCV or PCI_ERR_ROOT_COR_RCV are set. But this
> > > assumption is incorrect.
> > >
> > > Consider a scenario where aer_irq() is triggered for a correctable
> > > error, and while we process the error and before we clear the error
> > > status in "Root Error Status" register, if the same kind of error
> > > is triggered again, since aer_irq() only clears events it saw, the
> > > multi-bit error is left in tact. This will cause the interrupt to fire
> > > again, resulting in entering aer_irq() with just the multi-bit error
> > > logged in the "Root Error Status" register.
> > >
> > > Repeated AER recovery test has revealed this condition does happen
> > > and this prevents any new interrupt from being triggered. Allow to
> > > process interrupt even if only multi-correctable (BIT 1) or
> > > multi-uncorrectable bit (BIT 3) is set.
> > >
> > > Also note that, for cases with only multi-bit error is set, since this
> > > is not the first occurrence of the error, PCI_ERR_ROOT_ERR_SRC may have
> > > zero or some junk value. So we cannot cleanly process this error
> > > information using aer_isr_one_error(). All we are attempting with this
> > > fix is to make sure error interrupt processing can continue in this
> > > scenario.
> > >
> > > This error can be reproduced by making following changes to the
> > > aer_irq() function and by executing the given test commands.
> > >
> > > static irqreturn_t aer_irq(int irq, void *context)
> > > struct aer_err_source e_src = {};
> > >
> > > pci_read_config_dword(rp, aer + PCI_ERR_ROOT_STATUS,
> > > &e_src.status);
> > > + pci_dbg(pdev->port, "Root Error Status: %04x\n",
> > > + e_src.status);
> > > if (!(e_src.status & AER_ERR_STATUS_MASK))
> >
> > Do you mean
> >
> > if (!(e_src.status & (PCI_ERR_ROOT_UNCOR_RCV|PCI_ERR_ROOT_COR_RCV)))
> >
> > here? AER_ERR_STATUS_MASK would be after this fix.
>
> Yes. You are correct. Do you want me to update it and Fixes tag
> and send next version?

I moved the repro details to a bugzilla, updated the commit log as
below, and applied to pci/error for v5.19, thanks!


commit 203926da2bff ("PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits")
Author: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Date: Mon Apr 18 15:02:37 2022 +0000

PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits

When a Root Port or Root Complex Event Collector receives an error Message
e.g., ERR_COR, it sets PCI_ERR_ROOT_COR_RCV in the Root Error Status
register and logs the Requester ID in the Error Source Identification
register. If it receives a second ERR_COR Message before software clears
PCI_ERR_ROOT_COR_RCV, hardware sets PCI_ERR_ROOT_MULTI_COR_RCV and the
Requester ID is lost.

In the following scenario, PCI_ERR_ROOT_MULTI_COR_RCV was never cleared:

- hardware receives ERR_COR message
- hardware sets PCI_ERR_ROOT_COR_RCV
- aer_irq() entered
- aer_irq(): status = pci_read_config_dword(PCI_ERR_ROOT_STATUS)
- aer_irq(): now status == PCI_ERR_ROOT_COR_RCV
- hardware receives second ERR_COR message
- hardware sets PCI_ERR_ROOT_MULTI_COR_RCV
- aer_irq(): pci_write_config_dword(PCI_ERR_ROOT_STATUS, status)
- PCI_ERR_ROOT_COR_RCV is cleared; PCI_ERR_ROOT_MULTI_COR_RCV is set
- aer_irq() entered again
- aer_irq(): status = pci_read_config_dword(PCI_ERR_ROOT_STATUS)
- aer_irq(): now status == PCI_ERR_ROOT_MULTI_COR_RCV
- aer_irq() exits because PCI_ERR_ROOT_COR_RCV not set
- PCI_ERR_ROOT_MULTI_COR_RCV is still set

The same problem occurred with ERR_NONFATAL/ERR_FATAL Messages and
PCI_ERR_ROOT_UNCOR_RCV and PCI_ERR_ROOT_MULTI_UNCOR_RCV.

Fix the problem by queueing an AER event and clearing the Root Error Status
bits when any of these bits are set:

PCI_ERR_ROOT_COR_RCV
PCI_ERR_ROOT_UNCOR_RCV
PCI_ERR_ROOT_MULTI_COR_RCV
PCI_ERR_ROOT_MULTI_UNCOR_RCV

See the bugzilla link for details from Eric about how to reproduce this
problem.

[bhelgaas: commit log, move repro details to bugzilla]
Fixes: e167bfcaa4cd ("PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215992
Link: https://lore.kernel.org/r/20220418150237.1021519-1-sathyanarayanan.kuppuswamy@linux.intel.com
Reported-by: Eric Badger <ebadger@purestorage.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>

\
 
 \ /
  Last update: 2022-05-18 00:29    [W:0.129 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site