lkml.org 
[lkml]   [2022]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 2/7] dt-bindings: thermal: Add binding document for mt6873 thermal controller
On Thu, May 12, 2022 at 04:25:51PM +0200, Krzysztof Kozlowski wrote:
> On 12/05/2022 14:24, Alexandre Bailon wrote:
> > From: Michael Kao <michael.kao@mediatek.com>
> >
> > This patch adds binding document for mt6873 thermal controller.
>
> Thank you for your patch. There is something to discuss/improve.
>
> >
> > Signed-off-by: Michael Kao <michael.kao@mediatek.com>
> > Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
> > ---
> > .../thermal/mediatek-thermal-lvts.yaml | 81 +++++++++++++++++++
> > 1 file changed, 81 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml b/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
> > new file mode 100644
> > index 000000000000..69ffe7b14c21
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
>
> filename: vendor,device
> so something like mediatek,mt6873-lvts.yaml or
> mediatek,mt6873-lvts-thermal.yaml
>
> > @@ -0,0 +1,81 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/thermal/mediatek-thermal-lvts.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Mediatek SoC LVTS thermal controller (DTS) binding
>
> s/(DTS) binding//
> (unless DTS means something related to hardware)
>
> > +
> > +maintainers:
> > + - Yu-Chia Chang <ethan.chang@mediatek.com>
> > + - Ben Tseng <ben.tseng@mediatek.com>
> > +
> > +properties:
> > + compatible:
> > + const: mediatek,mt6873-lvts
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + maxItems: 1
> > +
> > + clock-names:
> > + items:
> > + - const: lvts_clk
>
> Skip "_clk" suffix, so just lvts.

Or drop altogether. There's generally no good name when there's only one
entry so folks just make up 'clk', 'phy', 'rst', etc. or $block for the
name.

Rob

\
 
 \ /
  Last update: 2022-05-17 20:01    [W:0.070 / U:1.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site