lkml.org 
[lkml]   [2022]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 15/17] PCI: dwc: Introduce dma-ranges property support for RC-host
On Thu, May 12, 2022 at 10:41:35PM +0300, Serge Semin wrote:
> On Thu, May 12, 2022 at 07:27:08PM +0530, Manivannan Sadhasivam wrote:
> > On Wed, May 04, 2022 at 12:46:36AM +0300, Serge Semin wrote:
> > > In accordance with the generic PCIe Root Port DT-bindings the "dma-ranges"
> > > property has the same format as the "ranges" property. The only difference
> > > is in their semantics. The "dma-ranges" property describes the PCIe-to-CPU
> > > memory mapping in opposite to the CPU-to-PCIe mapping of the "ranges"
> > > property. Even though the DW PCIe controllers are normally equipped with
> > > internal Address Translation Unit which inbound and outbound tables can be
> > > used to implement both properties semantics, it was surprise for me to
> > > discover that the host-related part of the DW PCIe driver currently
> > > supports the "ranges" property only while the "dma-ranges" windows are
> > > just ignored. Having the "dma-ranges" supported in the driver would be
> > > very handy for the platforms, that don't tolerate the 1:1 CPU-PCIe memory
> > > mapping and require customized the PCIe memory layout. So let's fix that
> > > by introducing the "dma-ranges" property support.
> > >
> > > First of all we suggest to rename the dw_pcie_prog_inbound_atu() method to
> > > dw_pcie_prog_ep_inbound_atu() and create a new version of the
> > > dw_pcie_prog_inbound_atu() function. Thus we'll have two methods for RC
> > > and EP controllers respectively in the same way as it has been developed
> > > for the outbound ATU setup methods.
> > >
> > > Secondly aside with the memory window index and type the new
> > > dw_pcie_prog_inbound_atu() function will accept CPU address, PCIe address
> > > and size as its arguments. These parameters define the PCIe and CPU memory
> > > ranges which will be used to setup the respective inbound ATU mapping. The
> > > passed parameters need to be verified against the ATU ranges constraints
> > > in the same way as it is done for the outbound ranges.
> > >
> > > Finally the DMA-ranges detected for the PCIe controller need to be
> > > converted into the inbound ATU entries during the host controller
> > > initialization procedure. It will be done in the framework of the
> > > dw_pcie_iatu_setup() method. Note before setting the inbound ranges up we
> > > need to disable all the inbound ATU entries in order to prevent unexpected
> > > PCIe TLPs translations defined by some third party software like
> > > bootloader.
> > >
> > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> > > ---
> > > .../pci/controller/dwc/pcie-designware-ep.c | 4 +-
> > > .../pci/controller/dwc/pcie-designware-host.c | 32 ++++++++++-
> > > drivers/pci/controller/dwc/pcie-designware.c | 57 ++++++++++++++++++-
> > > drivers/pci/controller/dwc/pcie-designware.h | 6 +-
> > > 4 files changed, 90 insertions(+), 9 deletions(-)
> > >
> > > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > index c62640201246..9b0540cfa9e8 100644
> > > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > @@ -167,8 +167,8 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, u8 func_no, int type,
> > > return -EINVAL;
> > > }
> > >
> > > - ret = dw_pcie_prog_inbound_atu(pci, func_no, free_win, type,
> > > - cpu_addr, bar);
> > > + ret = dw_pcie_prog_ep_inbound_atu(pci, func_no, free_win, type,
> > > + cpu_addr, bar);
> > > if (ret < 0) {
> > > dev_err(pci->dev, "Failed to program IB window\n");
> > > return ret;
> > > diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> > > index 7caca6c575a5..9cb406f5c185 100644
> > > --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> > > +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> > > @@ -612,12 +612,15 @@ static int dw_pcie_iatu_setup(struct pcie_port *pp)
> > > }
> > >
> > > /*
> > > - * Ensure all outbound windows are disabled before proceeding with
> > > - * the MEM/IO ranges setups.
> > > + * Ensure all out/inbound windows are disabled before proceeding with
> > > + * the MEM/IO (dma-)ranges setups.
> > > */
> > > for (i = 0; i < pci->num_ob_windows; i++)
> > > dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_OB, i);
> > >
> > > + for (i = 0; i < pci->num_ib_windows; i++)
> > > + dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_IB, i);
> > > +
> > > i = 0;
> > > resource_list_for_each_entry(entry, &pp->bridge->windows) {
> > > if (resource_type(entry->res) != IORESOURCE_MEM)
> > > @@ -654,9 +657,32 @@ static int dw_pcie_iatu_setup(struct pcie_port *pp)
> > > }
> > >
> > > if (pci->num_ob_windows <= i)
> > > - dev_warn(pci->dev, "Resources exceed number of ATU entries (%d)\n",
> > > + dev_warn(pci->dev, "Ranges exceed outbound iATU size (%d)\n",
> > > pci->num_ob_windows);
> > >
> > > + i = 0;
> > > + resource_list_for_each_entry(entry, &pp->bridge->dma_ranges) {
> > > + if (resource_type(entry->res) != IORESOURCE_MEM)
> > > + continue;
> > > +
> > > + if (pci->num_ib_windows <= i)
> > > + break;
> > > +
> > > + ret = dw_pcie_prog_inbound_atu(pci, i++, PCIE_ATU_TYPE_MEM,
> > > + entry->res->start,
> > > + entry->res->start - entry->offset,
> > > + resource_size(entry->res));
> > > + if (ret) {
> > > + dev_err(pci->dev, "Failed to set DMA range %pr\n",
> > > + entry->res);
> > > + return ret;
> > > + }
> > > + }
> > > +
> > > + if (pci->num_ib_windows <= i)
> > > + dev_warn(pci->dev, "Dma-ranges exceed inbound iATU size (%u)\n",
> > > + pci->num_ib_windows);
> > > +
> > > return 0;
> > > }
> > >
> > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> > > index 747e252c09e6..33718ed6c511 100644
> > > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > > @@ -397,8 +397,61 @@ static inline void dw_pcie_writel_atu_ib(struct dw_pcie *pci, u32 index, u32 reg
> > > dw_pcie_writel_atu(pci, PCIE_ATU_REGION_DIR_IB, index, reg, val);
> > > }
> > >
> > > -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> > > - int type, u64 cpu_addr, u8 bar)
> > > +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int type,
> > > + u64 cpu_addr, u64 pci_addr, u64 size)
> > > +{
> > > + u64 limit_addr = pci_addr + size - 1;
> > > + u32 retries, val;
> > > +
> > > + if ((limit_addr & ~pci->region_limit) != (pci_addr & ~pci->region_limit) ||
> > > + !IS_ALIGNED(cpu_addr, pci->region_align) ||
> > > + !IS_ALIGNED(pci_addr, pci->region_align) ||
> > > + !IS_ALIGNED(size, pci->region_align) ||
> >
>
> > Why do you want the size to be aligned? What if I want to transfer a small size
> > buffer?
> >
> > Same question applies to outbound programming as well.
>
> You can't program a region with the unaligned size by the DW PCIe CSRs
> design. The limit address lower bits are read-only and fixed with
> one's in accordance with the IP-core synthesize parameter
> CX_ATU_MIN_REGION_SIZE. So the mapping is always performed in the
> CX_ATU_MIN_REGION_SIZE chunks.
>
> IATU_LIMIT_ADDR_OFF_{IN,OUT}BOUND.LIMIT_ADDR_HW =
> {(CX_ATU_MIN_REGION_SIZE == 65536) ? "0xffff" :
> (CX_ATU_MIN_REGION_SIZE == 32768) ? "0x7fff" :
> (CX_ATU_MIN_REGION_SIZE == 16384) ? "0x3fff" :
> (CX_ATU_MIN_REGION_SIZE == 8192) ? "0x1fff" :
> (CX_ATU_MIN_REGION_SIZE == 4096) ? "0xfff" : "0xffff"}
>

Right. Even though the minimum size that could be mapped is 4k, I could still
use that 4k size for mapping small buffers also. So you should not be erroring
out here if the size is not aligned. I know that it is a waste of memory but
that doesn't mean that it won't work.

Thanks,
Mani

> -Sergey
>
> >
> > Thanks,
> > Mani
> >
> > --
> > மணிவண்ணன் சதாசிவம்

--
மணிவண்ணன் சதாசிவம்

\
 
 \ /
  Last update: 2022-05-17 19:22    [W:1.086 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site