lkml.org 
[lkml]   [2022]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 0/3] Add support for Sercomm partitions
Hi Mikhail,

csharper2005@gmail.com wrote on Mon, 16 May 2022 15:12:28 +0000:

> This patch series add support for Sercomm mtd partition table parser. It's
> used in some Beeline, Netgear and Sercomm routers. The Sercomm partition
> map table contains real partition offsets, which may differ from device to
> device depending on the number and location of bad blocks on NAND.

Series applied in place of the previous version on mtd/next.

>
> Changes since:
> v4:
> - Add Acked-by to the first patch
>
> v3:
> - Fix commit message of the first patch
> - Add Reviewed-by to the second patch
>
> v2:
> - Fix mistakes in dt-binding
> - Add patch for new vendor prefix
> - Add vendor prefix to scpart-id property
>
> v1:
> - Add dt-binding in a separate patch
> - Remove redundant braces and logical NOT operator
> - Define pr_fmt
> - Replace kcalloc by kzalloc
> - Use of_get_child_count() and alloc big enough array before the
> for_each_child_of_node()
>
> Mikhail Zhilkin (3):
> dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefix
> dt-bindings: mtd: partitions: Extend fixed-partitions binding
> mtd: parsers: add support for Sercomm partitions
>
> .../mtd/partitions/fixed-partitions.yaml | 55 +++-
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> drivers/mtd/parsers/Kconfig | 9 +
> drivers/mtd/parsers/Makefile | 1 +
> drivers/mtd/parsers/scpart.c | 240 ++++++++++++++++++
> 5 files changed, 305 insertions(+), 2 deletions(-)
> create mode 100644 drivers/mtd/parsers/scpart.c
>


Thanks,
Miquèl

\
 
 \ /
  Last update: 2022-05-16 18:45    [W:0.064 / U:1.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site