lkml.org 
[lkml]   [2022]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 2/4] dt-bindings: phy: qcom,qmp: Describe phy@ subnode properly
Date
Currently the qcom,qmp-phy dt-binding doesn't describe
the 'reg' and '#phy-cells' properties for the phy@ subnode.

Fix the same.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
.../devicetree/bindings/phy/qcom,qmp-phy.yaml | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index c39ead81ecd7..60ab494df975 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -110,6 +110,18 @@ patternProperties:
Each device node of QMP phy is required to have as many child nodes as
the number of lanes the PHY has.
properties:
+ reg:
+ minItems: 1
+ maxItems: 6
+ description: |
+ List of offset and length pairs of register sets for PHY blocks.
+ There are two possible cases::
+ - tx, rx, pcs and pcs_misc.
+ - tx, rx, pcs, tx2, rx2 and pcs_misc.
+
+ "#phy-cells":
+ const: 0
+
"#clock-cells":
enum: [ 0, 1, 2 ]

--
2.35.3
\
 
 \ /
  Last update: 2022-05-16 08:32    [W:0.279 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site