lkml.org 
[lkml]   [2022]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 17/17] ARM: dts: imx6q-apalis: Cleanup
Date
From: Max Krummenacher <max.krummenacher@toradex.com>

- Sort nodes and properties alphabetical
- End all pinctrl node names in grp and avoid using dashes
- Change the pmic's node name to pmic@8 per binding requirement
- Add sound-dai-cells to the codec node per binding requirement

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>

---

arch/arm/boot/dts/imx6q-apalis-eval.dts | 24 +--
arch/arm/boot/dts/imx6q-apalis-ixora.dts | 19 +-
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 221 ++++++++++++-----------
3 files changed, 132 insertions(+), 132 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
index 5c4d9a4ec586..b3e169239a19 100644
--- a/arch/arm/boot/dts/imx6q-apalis-eval.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts
@@ -36,31 +36,31 @@
pinctrl-0 = <&pinctrl_gpio_keys>;

wakeup {
- label = "Wake-Up";
+ debounce-interval = <10>;
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ label = "Wake-Up";
linux,code = <KEY_WAKEUP>;
- debounce-interval = <10>;
wakeup-source;
};
};

reg_pcie_switch: regulator-pcie-switch {
compatible = "regulator-fixed";
- regulator-name = "pcie_switch";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ enable-active-high;
gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "pcie_switch";
startup-delay-us = <100000>;
- enable-active-high;
status = "okay";
};

reg_3v3_sw: regulator-3v3-sw {
compatible = "regulator-fixed";
- regulator-name = "3.3V_SW";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
regulator-always-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "3.3V_SW";
};
};

@@ -124,11 +124,11 @@
status = "okay";
};

-&reg_usb_otg_vbus {
+&reg_usb_host_vbus {
status = "okay";
};

-&reg_usb_host_vbus {
+&reg_usb_otg_vbus {
status = "okay";
};

@@ -177,8 +177,8 @@

/* SD1 */
&usdhc2 {
+ cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
- cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index 97ddf4621bdf..8a12585ab062 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -36,38 +36,37 @@
pinctrl-0 = <&pinctrl_gpio_keys>;

wakeup {
- label = "Wake-Up";
+ debounce-interval = <10>;
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ label = "Wake-Up";
linux,code = <KEY_WAKEUP>;
- debounce-interval = <10>;
wakeup-source;
};
};

leds {
compatible = "gpio-leds";
-
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds_ixora>;

led4-green {
- label = "LED_4_GREEN";
gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ label = "LED_4_GREEN";
};

led4-red {
- label = "LED_4_RED";
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ label = "LED_4_RED";
};

led5-green {
- label = "LED_5_GREEN";
gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ label = "LED_5_GREEN";
};

led5-red {
- label = "LED_5_RED";
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ label = "LED_5_RED";
};
};
};
@@ -129,11 +128,11 @@
status = "okay";
};

-&reg_usb_otg_vbus {
+&reg_usb_host_vbus {
status = "okay";
};

-&reg_usb_host_vbus {
+&reg_usb_otg_vbus {
status = "okay";
};

@@ -177,9 +176,9 @@

/* SD1 */
&usdhc2 {
+ cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
- cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
status = "okay";
};

diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 62d9d907432c..7a1feaa5bc23 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -89,18 +89,18 @@

reg_module_3v3: regulator-module-3v3 {
compatible = "regulator-fixed";
- regulator-name = "+V3.3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
regulator-always-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "+V3.3";
};

reg_module_3v3_audio: regulator-module-3v3-audio {
compatible = "regulator-fixed";
- regulator-name = "+V3.3_AUDIO";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
regulator-always-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "+V3.3_AUDIO";
};

reg_ov5640_1v8_d_o_vdd: regulator-ov5640-1v8-d-o-vdd {
@@ -125,63 +125,63 @@

reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "usb_otg_vbus";
status = "disabled";
};

/* on module USB hub */
reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
- regulator-name = "usb_host_vbus_hub";
- regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "usb_host_vbus_hub";
startup-delay-us = <2000>;
- enable-active-high;
status = "okay";
};

reg_usb_host_vbus: regulator-usb-host-vbus {
compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
- regulator-name = "usb_host_vbus";
- regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "usb_host_vbus";
vin-supply = <&reg_usb_host_vbus_hub>;
status = "disabled";
};

sound {
compatible = "fsl,imx-audio-sgtl5000";
- model = "imx6q-apalis-sgtl5000";
- ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"LINE_IN", "Line In Jack",
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
- mux-int-port = <1>;
+ model = "imx6q-apalis-sgtl5000";
mux-ext-port = <4>;
+ mux-int-port = <1>;
+ ssi-controller = <&ssi1>;
};

sound_spdif: sound-spdif {
compatible = "fsl,imx-audio-spdif";
- model = "imx-spdif";
spdif-controller = <&spdif>;
spdif-in;
spdif-out;
+ model = "imx-spdif";
status = "disabled";
};
};
@@ -495,104 +495,105 @@
sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";

- pmic: pfuze100@8 {
+ pmic: pmic@8 {
compatible = "fsl,pfuze100";
fsl,pmic-stby-poweroff;
reg = <0x08>;

regulators {
sw1a_reg: sw1ab {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1875000>;
+ regulator-min-microvolt = <300000>;
regulator-ramp-delay = <6250>;
};

sw1c_reg: sw1c {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1875000>;
+ regulator-min-microvolt = <300000>;
regulator-ramp-delay = <6250>;
};

sw3a_reg: sw3a {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1975000>;
+ regulator-min-microvolt = <400000>;
};

swbst_reg: swbst {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5150000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5150000>;
+ regulator-min-microvolt = <5000000>;
};

snvs_reg: vsnvs {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <1000000>;
};

vref_reg: vrefddr {
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
};

vgen1_reg: vgen1 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1550000>;
+ regulator-min-microvolt = <800000>;
};

vgen2_reg: vgen2 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1550000>;
+ regulator-min-microvolt = <800000>;
};

vgen3_reg: vgen3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
};

vgen4_reg: vgen4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
};

vgen5_reg: vgen5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
};

vgen6_reg: vgen6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
};
};
};

codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
- reg = <0x0a>;
+ #sound-dai-cells = <0>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
- clocks = <&clks IMX6QDL_CLK_CKO>;
+ reg = <0x0a>;
VDDA-supply = <&reg_module_3v3_audio>;
VDDIO-supply = <&reg_module_3v3>;
VDDD-supply = <&vgen4_reg>;
@@ -601,15 +602,15 @@
/* STMPE811 touch screen controller */
stmpe811@41 {
compatible = "st,stmpe811";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_touch_int>;
- reg = <0x41>;
+ blocks = <0x5>;
+ id = <0>;
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
- interrupt-parent = <&gpio4>;
interrupt-controller;
- id = <0>;
- blocks = <0x5>;
+ interrupt-parent = <&gpio4>;
irq-trigger = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch_int>;
+ reg = <0x41>;
/* 3.25 MHz ADC clock speed */
st,adc-freq = <1>;
/* 12-bit ADC */
@@ -639,9 +640,9 @@

stmpe_adc: stmpe_adc {
compatible = "st,stmpe-adc";
+ #io-channel-cells = <1>;
/* forbid to use ADC channels 3-0 (touch) */
st,norequest-mask = <0x0F>;
- #io-channel-cells = <1>;
};
};
};
@@ -661,9 +662,9 @@

adv_7280: adv7280@21 {
compatible = "adi,adv7280";
- reg = <0x21>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu1_csi0>;
+ reg = <0x21>;
status = "disabled";

port {
@@ -679,8 +680,8 @@
AVDD-supply = <&reg_ov5640_2v8_a_vdd>;
DOVDD-supply = <&reg_ov5640_1v8_d_o_vdd>;
DVDD-supply = <&reg_ov5640_1v8_d_o_vdd>;
- clocks = <&clks IMX6QDL_CLK_CKO2>;
clock-names = "xclk";
+ clocks = <&clks IMX6QDL_CLK_CKO2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cam_mclk>;
/* These GPIOs are muxed with the iomuxc node */
@@ -778,73 +779,73 @@
};

&uart1 {
+ fsl,dte-mode;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
- fsl,dte-mode;
uart-has-rtscts;
status = "disabled";
};

&uart2 {
+ fsl,dte-mode;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_dte>;
- fsl,dte-mode;
uart-has-rtscts;
status = "disabled";
};

&uart4 {
+ fsl,dte-mode;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4_dte>;
- fsl,dte-mode;
status = "disabled";
};

&uart5 {
+ fsl,dte-mode;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5_dte>;
- fsl,dte-mode;
status = "disabled";
};

&usbotg {
+ disable-over-current;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
- disable-over-current;
status = "disabled";
};

/* MMC1 */
&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
- cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
- vqmmc-supply = <&reg_module_3v3>;
bus-width = <8>;
+ cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
disable-wp;
no-1-8-v;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
+ vqmmc-supply = <&reg_module_3v3>;
status = "disabled";
};

/* SD1 */
&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- vqmmc-supply = <&reg_module_3v3>;
bus-width = <4>;
disable-wp;
no-1-8-v;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ vqmmc-supply = <&reg_module_3v3>;
status = "disabled";
};

/* eMMC */
&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3>;
- vqmmc-supply = <&reg_module_3v3>;
bus-width = <8>;
no-1-8-v;
non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ vqmmc-supply = <&reg_module_3v3>;
status = "okay";
};

@@ -861,49 +862,49 @@
&pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
>;

- pinctrl_apalis_gpio1: gpio2io04grp {
+ pinctrl_apalis_gpio1: apalisgpio1grp {
fsl,pins = <
MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
>;
};

- pinctrl_apalis_gpio2: gpio2io05grp {
+ pinctrl_apalis_gpio2: apalisgpio2grp {
fsl,pins = <
MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0
>;
};

- pinctrl_apalis_gpio3: gpio2io06grp {
+ pinctrl_apalis_gpio3: apalisgpio3grp {
fsl,pins = <
MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0
>;
};

- pinctrl_apalis_gpio4: gpio2io07grp {
+ pinctrl_apalis_gpio4: apalisgpio4grp {
fsl,pins = <
MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0
>;
};

- pinctrl_apalis_gpio5: gpio6io10grp {
+ pinctrl_apalis_gpio5: apalisgpio5grp {
fsl,pins = <
MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0
>;
};

- pinctrl_apalis_gpio6: gpio6io09grp {
+ pinctrl_apalis_gpio6: apalisgpio6grp {
fsl,pins = <
MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0
>;
};

- pinctrl_apalis_gpio7: gpio1io02grp {
+ pinctrl_apalis_gpio7: apalisgpio7grp {
fsl,pins = <
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0
>;
};

- pinctrl_apalis_gpio8: gpio1io06grp {
+ pinctrl_apalis_gpio8: apalisgpio8grp {
fsl,pins = <
MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0
>;
@@ -996,7 +997,7 @@
>;
};

- pinctrl_gpio_bl_on: gpioblon {
+ pinctrl_gpio_bl_on: gpioblongrp {
fsl,pins = <
MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0
>;
@@ -1141,7 +1142,7 @@
>;
};

- pinctrl_mmc_cd: gpiommccdgrp {
+ pinctrl_mmc_cd: mmccdgrp {
fsl,pins = <
/* MMC1 CD */
MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
@@ -1172,35 +1173,35 @@
>;
};

- pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
+ pinctrl_regulator_usbh_pwr: regusbhpwrgrp {
fsl,pins = <
/* USBH_EN */
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058
>;
};

- pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp {
+ pinctrl_regulator_usbhub_pwr: regusbhubpwrgrp {
fsl,pins = <
/* USBH_HUB_EN */
MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058
>;
};

- pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp {
+ pinctrl_regulator_usbotg_pwr: regusbotgpwrgrp {
fsl,pins = <
/* USBO1 power en */
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058
>;
};

- pinctrl_reset_moci: gpioresetmocigrp {
+ pinctrl_reset_moci: resetmocigrp {
fsl,pins = <
/* RESET_MOCI control */
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058
>;
};

- pinctrl_sd_cd: gpiosdcdgrp {
+ pinctrl_sd_cd: sdcdgrp {
fsl,pins = <
/* SD1 CD */
MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
@@ -1220,13 +1221,22 @@
>;
};

- pinctrl_touch_int: gpiotouchintgrp {
+ pinctrl_touch_int: touchintgrp {
fsl,pins = <
/* STMPE811 interrupt */
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
>;
};

+ /* Additional DTR, DSR, DCD */
+ pinctrl_uart1_ctrl: uart1ctrlgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+ MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+ MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+ >;
+ };
+
pinctrl_uart1_dce: uart1dcegrp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
@@ -1244,15 +1254,6 @@
>;
};

- /* Additional DTR, DSR, DCD */
- pinctrl_uart1_ctrl: uart1ctrlgrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
- MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
- MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
- >;
- };
-
pinctrl_uart2_dce: uart2dcegrp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
@@ -1306,7 +1307,7 @@
>;
};

- pinctrl_usdhc1_4bit: usdhc1grp_4bit {
+ pinctrl_usdhc1_4bit: usdhc1-4bitgrp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071
@@ -1317,7 +1318,7 @@
>;
};

- pinctrl_usdhc1_8bit: usdhc1grp_8bit {
+ pinctrl_usdhc1_8bit: usdhc1-8bitgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
--
2.20.1
\
 
 \ /
  Last update: 2022-05-16 14:02    [W:0.240 / U:1.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site