lkml.org 
[lkml]   [2022]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v7 1/2] dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
From

Cc'ing krzysztof.kozlowski@linaro.org

On 11/05/2022 13:06, Keerthy wrote:
> Add VTM bindings documentation. In the Voltage Thermal
> Management Module(VTM), K3 J72XX supplies a voltage
> reference and a temperature sensor feature that are gathered in the band
> gap voltage and temperature sensor (VBGAPTS) module. The band
> gap provides current and voltage reference for its internal
> circuits and other analog IP blocks. The analog-to-digital
> converter (ADC) produces an output value that is proportional
> to the silicon temperature.
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> ---
> .../bindings/thermal/ti,j72xx-thermal.yaml | 64 +++++++++++++++++++
> 1 file changed, 64 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
>
> diff --git a/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
> new file mode 100644
> index 000000000000..83f8f444a133
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
> @@ -0,0 +1,64 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments J72XX VTM (DTS) binding
> +
> +maintainers:
> + - Keerthy <j-keerthy@ti.com>
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - ti,j721e-vtm
> + - ti,j7200-vtm
> +
> + reg:
> + items:
> + - description: VTM cfg1 register space
> + - description: VTM cfg2 register space
> + - description: VTM efuse register space
> +
> + power-domains:
> + maxItems: 1
> +
> + "#thermal-sensor-cells":
> + const: 1
> +
> +required:
> + - compatible
> + - reg
> + - power-domains
> + - "#thermal-sensor-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/soc/ti,sci_pm_domain.h>
> + wkup_vtm0: thermal-sensor@42040000 {
> + compatible = "ti,j721e-vtm";
> + reg = <0x42040000 0x350>,
> + <0x42050000 0x350>,
> + <0x43000300 0x10>;
> + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> + mpu_thermal: mpu-thermal {
> + polling-delay-passive = <250>; /* milliseconds */
> + polling-delay = <500>; /* milliseconds */
> + thermal-sensors = <&wkup_vtm0 0>;
> +
> + trips {
> + mpu_crit: mpu-crit {
> + temperature = <125000>; /* milliCelsius */
> + hysteresis = <2000>; /* milliCelsius */
> + type = "critical";
> + };
> + };
> + };
> +...


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2022-05-16 12:33    [W:0.146 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site