lkml.org 
[lkml]   [2022]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] dt-bindings: PCI: xilinx-cpm: Fix reg property order
Date
All existing vendor DTSes are using "cpm_slcr" reg followed by "cfg" reg.

This order is also suggested by node name which is pcie@fca10000 which
suggests that cpm_slcr register should be the first.

Driver itself is using devm_platform_ioremap_resource_byname() for both
names that's why there is no functional change even on description which
are using current order.

But still prefer to change order to cover currently used description.
Fixes: e22fadb1d014 ("PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port")

Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
---
.../devicetree/bindings/pci/xilinx-versal-cpm.yaml | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
index 32f4641085bc..cca395317a4c 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
+++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
@@ -18,13 +18,13 @@ properties:

reg:
items:
- - description: Configuration space region and bridge registers.
- description: CPM system level control and status registers.
+ - description: Configuration space region and bridge registers.

reg-names:
items:
- - const: cfg
- const: cpm_slcr
+ - const: cfg

interrupts:
maxItems: 1
@@ -86,9 +86,9 @@ examples:
ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
<0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
msi-map = <0x0 &its_gic 0x0 0x10000>;
- reg = <0x6 0x00000000 0x0 0x10000000>,
- <0x0 0xfca10000 0x0 0x1000>;
- reg-names = "cfg", "cpm_slcr";
+ reg = <0x0 0xfca10000 0x0 0x1000>,
+ <0x6 0x00000000 0x0 0x10000000>;
+ reg-names = "cpm_slcr", "cfg";
pcie_intc_0: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
--
2.17.1
\
 
 \ /
  Last update: 2022-05-16 12:23    [W:0.155 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site