lkml.org 
[lkml]   [2022]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] drivers/pci: wait downstream hierarchy ready instead of slot itself ready, after secondary bus reset
On Mon, 16 May 2022 15:28:25 -0500
Bjorn Helgaas <helgaas@kernel.org> wrote:

> [+cc Lukas, pciehp expert; Alex, reset person]
>
> Thanks for the testing, analysis, and patch!
>
> Run "git log --oneline drivers/pci/pci.c" and make your subject line
> similar.
>
> On Tue, May 17, 2022 at 01:30:47AM +0800, windy.bi.enflame wrote:
> > While I do reset test of a PCIe endpoint device on a server, I find that
> > the EP device always been removed and re-inserted again by hotplug module,
> > after secondary bus reset.
> >
> > After checking I find:
> > 1> "pciehp_reset_slot()" always disable slot's DLLSC interrupt before
> > doing reset and restore after reset, to try to filter the hotplug
> > event happened during reset.
> > 2> "pci_bridge_secondary_bus_reset()" sleep 1 seconad and "pci_dev_wait()"
> > until device ready with "PCIE_RESET_READY_POLL_MS" timeout.
> > 3> There is a PCIe switch between CPU and the EP devicem the topology as:
> > CPU <-> Switch <-> EP.
> > 4> While trigger sbr reset at the switch's downstream port, it needs 1.5
> > seconds for internal enumeration.
>
> s/seconad/second/
> s/devicem/device/
> s/sbr/SBR/
> s/"pciehp_reset_slot()"/pciehp_reset_slot()/ also for other functions
>
> > About why 1.5 seconds ready time is not filtered by "pci_dev_wait()" with
> > "PCIE_RESET_READY_POLL_MS" timeout, I find it is because in
> > "pci_bridge_secondary_bus_reset()", the function is operating slot's
> > config space to trigger sbr and also wait slot itself ready by input same
> > "dev" parameter. Different from other resets like FLR which is triggered
> > by operating the config space of EP device itself, sbr is triggered by
> > up slot but need to wait downstream devices' ready, so I think function
> > "pci_dev_wait()" works for resets like FLR but not for sbr.

Is the unexpected hotplug occurring then because the device is not
ready after the 1s sleep after the sbr and we re-trigger the hotplug
controller which then triggers because the link status is still down?

> > In this proposed patch, I'm changing the waiting function used in sbr to
> > "pci_bridge_secondary_bus_wait()" which will wait all the downstream
> > hierarchy ready with the same timeout setting "PCIE_RESET_READY_POLL_MS".
> > In "pci_bridge_secondary_bus_wait()" the "subordinate" and
> > "subordinate->devices" will be checked firstly, and then downstream
> > devices' present state.
> >
> > Signed-off-by: windy.bi.enflame <windy.bi.enflame@gmail.com>
>
> See https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/submitting-patches.rst?id=v5.17#n407
> regarding pseudonyms.
>
> > ---
> > drivers/pci/pci.c | 25 ++++++++++++++++++++++++-
> > 1 file changed, 24 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > index 9ecce435fb3f..d7ec3859268b 100644
> > --- a/drivers/pci/pci.c
> > +++ b/drivers/pci/pci.c
> > @@ -5002,6 +5002,29 @@ void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev)
> > }
> > }
> >
> > +int pci_bridge_secondary_bus_wait(struct pci_dev *bridge, int timeout)
> > +{
> > + struct pci_dev *dev;
> > + int delay = 1;
> > +
> > + if (!bridge->subordinate || list_empty(&bridge->subordinate->devices))
> > + return 0;
> > +
> > + list_for_each_entry(dev, &bridge->subordinate->devices, bus_list) {
> > + while (!pci_device_is_present(dev)) {
> > + if (delay > timeout) {
> > + pci_warn(dev, "secondary bus not ready after %dms\n", delay);
> > + return -ENOTTY;
> > + }
> > +
> > + msleep(delay);
> > + delay *= 2;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > void pci_reset_secondary_bus(struct pci_dev *dev)
> > {
> > u16 ctrl;
> > @@ -5045,7 +5068,7 @@ int pci_bridge_secondary_bus_reset(struct pci_dev *dev)
> > {
> > pcibios_reset_secondary_bus(dev);
> >
> > - return pci_dev_wait(dev, "bus reset", PCIE_RESET_READY_POLL_MS);

I assume pci_dev_wait here was always a no-op because we're testing the
wrong device, maybe this should be marked as:

Fixes: 6b2f1351af56 ("PCI: Wait for device to become ready after secondary bus reset")

> > + return pci_bridge_secondary_bus_wait(dev, PCIE_RESET_READY_POLL_MS);

The theory looks reasonable to me, but I'd hope we cold get a better
commit log and improve the dev_warn message. It seems to make sense to
use pci_device_is_present() since we shouldn't be dealing with VFs
after a bus reset, but I wonder if we want to enumerate all the missing
devices. Since the timeout has passed, we shouldn't incur any extra
delays beyond the first device that doesn't re-appear. Thanks,

Alex

> > }
> > EXPORT_SYMBOL_GPL(pci_bridge_secondary_bus_reset);
> >
> > --
> > 2.36.1
> >
>

\
 
 \ /
  Last update: 2022-05-17 01:00    [W:1.168 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site