lkml.org 
[lkml]   [2022]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V12 7/9] regulator: Add a regulator driver for the PM8008 PMIC
Quoting Satya Priya (2022-05-11 06:18:31)
> diff --git a/drivers/regulator/qcom-pm8008-regulator.c b/drivers/regulator/qcom-pm8008-regulator.c
> new file mode 100644
> index 0000000..0361f02
> --- /dev/null
> +++ b/drivers/regulator/qcom-pm8008-regulator.c
> @@ -0,0 +1,221 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
> +
> +#include <linux/device.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/qcom_pm8008.h>
> +#include <linux/module.h>
> +#include <linux/of.h>

Is this include used?

> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/of_regulator.h>

Is this include used?

> +
> +#define VSET_STEP_MV 8
> +#define VSET_STEP_UV (VSET_STEP_MV * 1000)
> +
> +#define LDO_ENABLE_REG(base) ((base) + 0x46)
> +#define ENABLE_BIT BIT(7)
> +
> +#define LDO_VSET_LB_REG(base) ((base) + 0x40)
> +
> +#define LDO_STEPPER_CTL_REG(base) ((base) + 0x3b)
> +#define DEFAULT_VOLTAGE_STEPPER_RATE 38400
> +#define STEP_RATE_MASK GENMASK(1, 0)
> +
> +struct pm8008_regulator_data {
> + const char *name;
> + const char *supply_name;
> + int min_uv;
> + int max_uv;
> + int min_dropout_uv;
> + const struct linear_range *voltage_range;
> +};
> +
> +struct pm8008_regulator {
> + struct device *dev;
> + struct regmap *regmap;
> + struct regulator_desc rdesc;
> + u16 base;
> + int step_rate;
> + int voltage_selector;
> +};
> +
> +static const struct linear_range nldo_ranges[] = {
> + REGULATOR_LINEAR_RANGE(528000, 0, 122, 8000),
> +};
> +
> +static const struct linear_range pldo_ranges[] = {
> + REGULATOR_LINEAR_RANGE(1504000, 0, 237, 8000),
> +};
> +
> +static const struct pm8008_regulator_data reg_data[] = {
> + /* name parent min_uv max_uv headroom_uv voltage_range */
> + { "ldo1", "vdd_l1_l2", 528000, 1504000, 225000, nldo_ranges, },
> + { "ldo2", "vdd_l1_l2", 528000, 1504000, 225000, nldo_ranges, },
> + { "ldo3", "vdd_l3_l4", 1504000, 3400000, 300000, pldo_ranges, },
> + { "ldo4", "vdd_l3_l4", 1504000, 3400000, 300000, pldo_ranges, },
> + { "ldo5", "vdd_l5", 1504000, 3400000, 200000, pldo_ranges, },
> + { "ldo6", "vdd_l6", 1504000, 3400000, 200000, pldo_ranges, },
> + { "ldo7", "vdd_l7", 1504000, 3400000, 200000, pldo_ranges, },
> +};
> +
> +static int pm8008_regulator_get_voltage(struct regulator_dev *rdev)
> +{
> + struct pm8008_regulator *pm8008_reg = rdev_get_drvdata(rdev);
> +
> + return pm8008_reg->voltage_selector;
> +}
> +
> +static inline int pm8008_write_voltage(struct pm8008_regulator *pm8008_reg,
> + int mV)
> +{
> + __le16 vset_raw;
> +
> + vset_raw = cpu_to_le16(mV);
> +
> + return regmap_bulk_write(pm8008_reg->regmap,
> + LDO_VSET_LB_REG(pm8008_reg->base),
> + (const void *)&vset_raw, sizeof(vset_raw));

Does sparse complain about casting away __le16?

> +}
> +
> +static int pm8008_regulator_set_voltage_time(struct regulator_dev *rdev,
> + int old_uV, int new_uv)
> +{
> + struct pm8008_regulator *pm8008_reg = rdev_get_drvdata(rdev);
> +
> + return DIV_ROUND_UP(abs(new_uv - old_uV), pm8008_reg->step_rate);
> +}
> +

\
 
 \ /
  Last update: 2022-05-16 21:04    [W:0.090 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site